Abstract:Separating azeotropic organic-organic mixtures using membranes is of great importance in the chemical and petrochemical industries, but remains extremely challenging because membranes must be able to withstand harsh working conditions while providing adequate permselectivity. Silicon carbide (SiC)-based membranes have attracted a great deal of interest due to their high level of structural stability, mechanical strength, and corrosion resistance. Herein is an account of the first study focused on a systematic investigation into the physicochemical and pore structural variations of polycarbosilane (PCS)-derived SiC-based membranes under different air-curing and pyrolysis temperatures. Air curing for cross-linking behavior was found to occur at temperatures as low as 150 °C, and the completion of polymer-to-ceramic conversion for PCS was observed at 750 °C. In addition, the pore structure and surface properties (hydrophilicity/hydrophobicity) of PCS membranes could be tuned by the pyrolysis temperature. PCS membranes derived from air curing at a temperature as low as 150 °C possessed sub-nanopores that ranged from 0.5 to 0.66 nm depending on the pyrolysis temperature. The formation of these sub-nanopores was attributed to sparsely cross-linked networks. Subsequently, the pervaporation (PV) performance of methanol/methyl acetate, methanol/toluene, and methanol/methyl tert-butyl ether were evaluated and discussed with respect to any effects of different pore sizes of the membranes and operating parameters. The most outstanding separation performance emerged from SiC-based membranes with a pore size of 0.50 nm that were air-cured at 150 °C and then pyrolyzed at 750 °C. The impressive PV separation capability was attributed to the surface hydrophilicity, suitable pore size, and high quality of the SiC-based membranes. Furthermore, the PV performance correlated well with single-gas permeation, suggesting that PV performance could be predicted based on single-gas permeation. The developed SiC-based membranes have excellent separation performance and are a promising candidate for the PV separation of MeOH from organic mixture systems.

Sub-nanometer scale tailoring of the microstructures of composite organosilica membranes for efficient pervaporation of toluene/n-heptane mixtures

Pervaporation removal of methanol from methanol/organic azeotropes using organosilica membranes: Experimental and modeling

Rigid-flexible coupled organosilica membranes toward high-efficiency molecules separation

Network engineering of organosilica membranes for efficient pervaporation dehydration

Preparation of Stable Multilayer PDMS Composite Pervaporation Membrane Incorporated with In-Situ Transformed Metal Organic Frameworks for Enhanced Butanol Recovery

A facile approach to silica-modified polysulfone microfiltration membranes for oil-in-water emulsion separation

Chemically tailored microporous nanocomposite membranes with multi-channels for intensified solvent permeation

Homogeneous sub-nanophase network tailoring of dual organosilica membrane for enhancing CO2 gas separation

Boosting the CO2 capture efficiency through aromatic bridged organosilica membranes

Microstructure Manipulation of MFI-type Zeolite Membranes on Hollow Fibers for Ethanol–water Separation

Covalent organic frameworks hybird membrane with optimized mass transport nanochannel for aromatic/aliphatic mixture pervaporation

Chemically tailored microporous nanocomposite membrane with multiple transport channels for fast solvent permeation

Synergistic Tuning of Microstructure and Morphology in Carbon Molecular Sieve Hollow Fibers for Propylene/Propane Separation

Low-temperature cross-linking fabrication of sub-nanoporous SiC-based membranes for application to the pervaporation removal of methanol

Rapid Solvent Transport and Tunable Molecular Sieving Enabled by Ultrathin Alkyl-Chain-engineered Polyamide Membranes

Development of Organosilica Membranes with Ionic Liquid-like Properties and Application to Organic Vapor Separation

Enhancing dehydration performance of isopropanol for flexible hybrid silica composite membranes with spray-coated active layer on polymers

Multiple Amine-Contained POSS-Functionalized Organosilica Membranes for Gas Separation

Improving the Pervaporation Performance of PDMS Membranes for Trichloroethylene by Incorporating Silane-Modified ZSM-5 Zeolite

Hydrophobic hollow fiber composite membranes based on hexadecyl-modified SiO 2 nanoparticles for toluene separation

Highly stable “pore-filling” tubular composite membrane by self-crosslinkable hyperbranched polymers for toluene/n-heptane separation