Abstract:Human activities and industrial pollutants that are released regularly in the surrounding, causes toxic metallic impurities like Hg, As, Cd and Pb to accumulate and enter the water bodies in different forms. These toxic metal contaminats can cause severe biological and environmental degradation and has the capability to threat human life. These severe consequences have led many organizations to determine maximimum quantities of metal ions in potable water and food. Safe limits for lead, mercury, arsenic and cadmium in potable water are 15,2, 10 and 5 parts per billion (ppb) respectively, as determined by EPA (Environmental Protection Agency). Various disorders in functioning of nucleic acid, immune system attack and other nervous system disorders can be caused due to repletion of As 3 + in human body. Detection of As 3 + ions in drinking water in presence of other competing analytes is a challenging task. Therefore, developing sensitive and accurate techniques for monitoring these toxic metal ions in water is the need of the hour. Analytical techniques such as AAS/AES, ICP-MS, ASV that were conventionally used, require expensive instruments, incur complicated measuring techniques and are time consuming. Alternatively, various sensors are fabricated for As 3 + ion detection, such as electrochemical, fluorescent, colorimetric and surface-enhanced Raman scattering. Inspite of these developments, sensors with ease of operation, portable analytical platform and low cost for user friendly analysis are still needed. In this work, curcumin functionalized zinc oxide nanorods (Cur-ZnO) were used as an electrical sensing platform for highly selective and sensitive As 3 + detection. Zinc oxide nanorods were synthesized using solvothermal approach and attachment of curcumin to ZnO nanrods were obtained through an in-situ approach. High resolution transmission electron microscopy (HRTEM), Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD) and Ultraviolet-visible (UV-Vis) absorbance analysis were done to confirm the attachment of curcumin sheets to ZnO nanorods. The sensing platform was fabricated in a novel staggered gate-field effect transistor (SG-FET) configuration with Cur-ZnO as the sensing layer. A high-k dielectric (hafnium oxide) was used as gate dielectric and aluminium was used as gate metal. The performance of the sensor towards As 3 + detection was investigated electrically by varying the gate voltage of the sensor device. The sensor was found to be highly selective towards As 3 + in presence of Pb 2+ , Hg 2+ ,Cd 2+ , Na + , Fe 3+ , K + and Cu 2+ . The interaction of As 3+ ions with the sensing layer was also studied using UV-Vis and PL spectrophotometer. The sensitivity of the sensor was seen to improve by tuning the gate voltage. Our work suggests that Cur-ZnO based staggered gate-field effect transistor (SG-FET) are promising towards development of portable, selective and sensitive arsenic ion detector in drinking water. Figure 1

Simple, Specific, and Ultra‐Sensitive Arsenic Detection in Real Drinking Water Samples Using an Impedimetric Green Sensor with Dimercaprol‐doped Solid Electrolyte

Detection of Phenylarsine Oxide in Drinking Water Using an Impedimetric Electrochemical Sensor with Gelatin-Based Solid Electrolyte Enriched with Mercaptoethanol: A Novel Prospective Green Biosensor Methodology

A simple and ultra‐sensitive electrochemical sensing approach for detection of arsenic (v) in drinking water

A Review of Nanocomposite-Modified Electrochemical Sensors for Water Quality Monitoring

A colorimetry based, semi-automated portable sensor device for the detection of arsenic in drinking water

Real-Time Water Quality Monitoring with Chemical Sensors

Mating Pheromone in Cryptococcus neoformans Is Regulated by a Transcriptional/Degradative “Futile” Cycle*

Development of artificial muscles based on electroactive ionomeric polymer-metal composites.

Detection of Arsenic in Groundwater Using A Surface Plasmon Resonance Sensor

A Portable Microfluidic Device-Based Colorimetric Naked-Eye Sensors for Determination of Mercury and Arsenic Ions in River Water Samples

Real-time Electronic Sensor Based on Black Phosphorus/aunps/dtt Hybrid Structure: Application in Arsenic Detection

[Hyperbaric oxygenation in cervico-facial cancerology].

Toward surface-enhanced Raman scattering using electroless substrate for trace arsenic detection and speciation

Electronic waste derived reduced graphene oxide supported silver nanoparticles for the electrochemical sensing of trace level arsenite in aqueous medium

Ultrafast Detection of Arsenic Using Carbon-Fiber Microelectrodes and Fast-Scan Cyclic Voltammetry

A simple and rapid head space-single drop microextraction-‘spectro-pipette’ (HS-SDME-SP) method for the on-site measurement of arsenic species in natural waters

(Digital Presentation) Novel Back gate-Field Effect Transistor (BG-FET) Based on Curcumin Functionalized Zinc Oxide Nanorods for Detection of Arsenic(III) Ions in Water

The fibrinogen degradation products (FgDP) levels in liver disease.

Environmentally Sustainable Detection of Arsenic using Convolutional Neural Networks and Imidazole-Based Organic Probes: Application in Food Samples and Arsenic Album

[Accelerated partial breast irradiation with image-guided intensity-modulated radiotherapy following breast-conserving surgery - preliminary results of a phase II clinical study].

Five years' experience with a small intracervical/intrauterine levonorgestrel-releasing device.