Abstract:Chemical-looping combustion (CLC) is a promising technology which can realize CO2 capture with low energy consumption. Carbon deposition is one of the main challenges in CLC of methane, which decreases the efficiency of combustion and CO2 capture. In this work, the carbon formation behaviors of four typical oxygen carriers (OCs) including NiO/ZrO2, Fe2O3/Al2O3, MnO2/ZrO2 and CuO/SiO2 were investigated, and a strategy for carbon elimination was proposed by arranging the four OCs with suitable sequences in fixed-bed reactor. It is found that carbon is easy to form on the NiO/ZrO2 OC, although it shows high CH4 conversion. The reduction of Fe2O3/Al2O3 is a stepwise process and carbon will be generated in the deep reduction from Fe3O4 to FeO/Fe. MnO2/ZrO2 OC exhibits poor activity for CH4 conversion, but it shows high resistance to carbon deposition. For CuO/SiO2 OC, it shows high CH4 conversion (89.1%) and CO2 selectivity (97.6%) with almost no formation of carbon. When combing the four OCs in the CuNiFeMn sequence, high-performance CuO/SiO2 and NiO/ZrO2 OCs in front of the filling fixed-bed can oxidize most of CH4. CuO/SiO2 OC will oxidize CH4 to CO2 and H2O, then the formed CO2/H2O may gasify the carbon deposition on the NiO/ZrO2 OC to produce CO and H2. Thereafter, these reducible gases as well as the residual CH4 can be oxidized by the following Fe2O3/Al2O3 and MnO2/ZrO2 OCs with relatively poor activity. In this way, the synergistic effect among the sequenced OC mixtures can significantly enhance the CLC efficiency and resistance to carbon deposition.

Promoted methane conversion to syngas over Fe-based garnets via chemical looping

Chemical Looping Conversion of Methane via Fe2O3-LaFeO3 Calcined from LaFe-MOF Precursor

Enhanced performance of chemical looping combustion of methane by combining oxygen carriers via optimizing the stacking sequences

Chemical looping co-conversion of CH4 and CO2 using Fe2O3/Al2O3 pellets as both oxygen carrier and catalyst in a fluidized bed reactor

Enhanced resistance to carbon deposition in chemical-looping combustion of methane: Synergistic effect of different oxygen carriers via sequence filling

Enhanced performance of LaFeO3 oxygen carriers by NiO for chemical looping partial oxidation of methane

Boosted carbon resistance of ceria-hexaaluminate by in-situ formed CeFexAl1−xO3 as oxygen pool for chemical looping dry reforming of methane

Chemical looping combustion of ultra low concentration of methane with Fe2O3/Al2O3 and CuO/SiO2

Dopant-Enhanced harmonization of α-Fe 2 O 3 oxygen migration and surface catalytic reactions during chemical looping reforming of methane

Syngas Production by Fe2SiO4 Oxygen Carrier in Chemical Looping Partial Oxidation of Methane

Oxygen Activity Tuning via FeO 6 Octahedral Tilting in Perovskite Ferrites for Chemical Looping Dry Reforming of Methane

Biomass based oxygenates modified Fe-Mn oxide with improved surface lattice oxygen mobility for the chemical looping-oxidative dehydrogenation of ethane to ethylene

Theoretical Insights into the Oxygen Supply Performance of Α-Fe2o3 in the Chemical-Looping Reforming of Methane

Near 100% CO selectivity in nanoscaled iron-based oxygen carriers for chemical looping methane partial oxidation

Nanoscale structural transformations in LaFeO 3 oxygen carriers for enhanced reactivity in chemical looping combustion

Promoting CO2 methanation via ligand-stabilized metal oxide clusters as hydrogen-donating motifs

Application of Mn–Fe Composite Oxides Loaded on Alumina as Oxygen Carrier for Chemical Looping Gasification

Hydrogen-rich syngas production from straw char by chemical looping gasification: The synergistic effect of Mn and Fe on Ni-based spinel structure as oxygen carrier

Chemical looping reforming of the micromolecular component from biomass pyrolysis via Fe2O3@SBA-16

Comparative Study of MxOy (M = Cu, Fe and Ni) Supported on Dolomite for Syngas Production Via Chemical Looping Reforming with Toluene