Abstract:This study involves the in‐situ polymerization technique to incorporate fluorinated graphene quantum dots (FGQD), fluorinated carbon black (FCB), fluorinated carbon nanotubes (FCNT), and fluorinated graphene (FG) into PI matrix. A series of fluorinated nanofiller/polyimide composite films were prepared. The effects of these fluorinated nanofiller on the low dielectric properties and other comprehensive characteristics of PI materials were systematically investigated. The resulting composite films demonstrate outstanding mechanical properties, significant hydrophobicity, and favorable dielectric performance, thus presenting potential applications in future advanced packaging technologies. There is an increasing demand for polyimide (PI) with excellent mechanical properties, good heat resistance, and low dielectric constant in integrated circuits and advanced packaging. Based on this, we report a strategy of tailoring the PI via fluorinated nanofillers modification to improve its mechanical properties, heat resistance, hydrophobicity, and reduce its dielectric constant. Specifically, different fluorinated nanofiller, including fluorinated graphene (FG), fluorinated carbon nanotubes (FCNT), fluorinated carbon black (FCB), and fluorinated graphene quantum dots (FGQD) were introduced into PI matrix to prepared composite films by a simple method of in‐situ polymerization, and the effect of different nanofillers on the properties of polyimide was systematically investigated. The results showed that the introduction of fluorinated nanofillers significantly improved the comprehensive performance of the composite films, especially the FGQD. FGQD/PI composite film with 0.5 wt% FGQD exhibits superior tensile strength (145.8 MPa), Young's modulus (2.83 GPa) and elongation at break (45.4%) the best comprehensive performance which are 10.0%, 19.4%, and 32.0% of those of pure PI, respectively. Most importantly, the FGQD/PI composite film shows decreased dielectric constant (from 3.38 to 2.93) at 1 MHz improved hydrophobicity and excellent heat resistance. The FGQD/PI composite film exhibits excellent comprehensive performance, thereby showing the potential in the future development of advanced packaging and microelectronics industry.

Preparation and Property of Bio-Polyimide/Halloysite Nanocomposite Based on 2,5-Furandicarboxylic Acid

Preparation and imidization of polyimide composites filled with boron nitride

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

Synthesis of Furan-Based Diamine and Its Application in the Preparation of Bio-Based Polyimide

High-Performance Polyimide Films Derived from Biomass-Based Furfural: Fabrication and Properties

Polyhedral oligosilsesquioxane-modified boron nitride enhances the mechanical properties of polyimide nanocomposites

Synthesis and properties of the amino-functionalized multiple-walled carbon nanotubes/polyimide nanocomposites

Preparation and properties of polyimide dielectric nanocomposites containing polyvinylpyrrolidone chemically functionalized barium titanate by in‐situ synthesis compounding

Synthesis and characterization of nanocomposites based on polyimide bearing benzimidazole side groups filled with titania nanoparticles

Synthesis and Properties of Optically Transparent Fluoro-Containing Polyimide Films with Reduced Linear Coefficients of Thermal Expansion from Organo-Soluble Resins Derived from Aromatic Diamine with Benzanilide Units

Properties of Polyimide/Silica Nanohybrids from Silicic Acid Oligomer

Biobased Poly(1,3-propylene 2,5-furandicarboxylate)-Carbon Nanotubes Nanocomposites with Enhanced Thermal, Mechanical Properties and Crystallization Behavior

Enhanced Mechanical and Thermal Properties of Polyimide Films Using Hydrophobic Fumed Silica Fillers

Polyimide-based composites reinforced by carbon nanotube-grafted carbon fiber for improved thermal conductivity and mechanical property

Comprehensive properties study of polyimide with fluorinated nanofillers

Ecofriendly Preparation of Cellulose Nanocrystal-Coated Polyimide Fiber: Strategy for Improved Wettability

High thermally stable thermosetting polyimides derived from a carborane-containing tetramine

Enhanced toughness and gas permeabilities of polyimide composites derived from polyimide matrix and flower‐like polyimide microparticles

Preparation and Properties of the Polyimide/multi-Walled Carbon Nanotubes (mwnts) Nanocomposites