Abstract:The present research attempts to comprehensively compare the evaporation characteristics of a novel R290/R13I1 (35/65 % by mass) with R1234yf in an offset-strip fin embedded plate heat exchanger. The impact of various testing phenomena, namely saturation temperature (T s ) (278 to 288 K), heat flux (q) (4000 to 10,000 W m −2 ), entry vapor quality (x i ) (0.1 to 0.8), and mass flux (G) (40 to 80 kg m −2 s −1 ) have been explored. Meanwhile, highly potential machine learning algorithms (MLAs) namely Linear Regression (LR), Multi-Layer Perceptron (MLP), and Extreme Gradient Boost regression (XGB) have been employed to predict the evaporation heat transfer coefficient (EHTC) and evaporation frictional pressure drop (EFPD) of the refrigerants. Findings revealed that the EHTC of R290/R13I1 is significantly lower than that of R1234yf by 7.9–38.8 % in the nucleation boiling or low mean vapor quality (x m ) domain, whereas it had superior EHTC by up to 18.2 % in the convective boiling domain (high x m ). Interestingly, there was a dry-out incidence at mid-x m ranges (0.35–0.5) for both refrigerants, except for R290/R13I1 at a higher G of 80 kg m −2 s −1 . In all cases (except at 10000 W m −2 ), the EFPD of R290/R13I1 increased by 0.3–11.1 % compared to that of R1234yf. The evaporation thermo-hydraulic performance (ETHP) factor analysis revealed that utilizing R290/R13I1 could perform satisfactorily in the convective boiling domain (x m > 0.5) with an ETHP factor ranging between 0.8 and 1.08, especially at high q, high T s , and low G conditions. New empirical correlations have been developed based on the experimental dataset for the EHTC and EFPD of the considered refrigerants with an mean absolute error (MAE) of up to 14.7 % and 13.4 %, respectively. Among the three MLAs with different enhancement methods, the EHTC and EFPD predictions using MLP, in combination with principal component analysis and hyperparameter tuning, had superior performance, with MAEs of 0.1119 and 0.0581, respectively, for R1234yf, while they were 0.1726 and 0.0482 for R290/R13I1.

Experimental study on boiling heat transfer characteristics of RDR-1, R134a, and R1234yf over a wide temperature range and comparative analysis of their system performance

Comparison of Flow Boiling Pressure Drop and Heat Transfer of R134a with Low GWP Alternative R1234ze(E) in a Dimpled Flat Duct

A Comprehensive Study of Drop-in Alternative Mixtures for R134a in a Mobile Air-Conditioning System

Experimental study of ternary mixture R32/R125/R161 as alternative refrigerant to R407C

Experimental Investigation on Flow Boiling Instability of R1233zd(E) in a Parallel Mini-Channel Heat Sink for the Application of Battery Thermal Management

Experimental Study on the Influence of Flame Retardants under High-Temperature Conditions on the Flammability of R1234ze(E) and R290

Investigating the Thermal-Hydraulic Performance of New Refrigerant Mixtures Through Numerical Simulation of Minichannel and Microchannel Evaporators

Flow Boiling Heat Transfer Characteristic of Refrigerant R1234ze(E) in Horizontal Circular Tube

Experimental Investigation on Boiling Heat Transfer Characteristics of R1234yf/R1336mzz(Z) in Horizontal Flow

Transitioning to low GWP refrigerants in automobiles: A numerical simulation study on R1234yf/R152a's heat transfer characteristics in porous microchannels

Experimental Analysis Of The Low-Gwp Refrigerant R1234yf As A Drop-In Replacement For R134a In A Typical Mobile Air Conditioning System

Mixed Convection Heat Transfer of Supercritical Pressure R1234yf in Horizontal Flow: Comparison Study As Alternative to R134a in Organic Rankine Cycles

Experimental Study of the Heat Transfer of Supercritical R1234yf As a Substitute for R134a in a Horizontal Micro-Fin Tube

Experimental Research on Cooling/Heating Performance Using R1234yf and R134a

An experimental comparative analysis and machine learning prediction on the evaporation characteristics of R1234yf and R290/R13I1 in a plate heat exchanger

Experimental and simulation study on R134a/RE170/R152a mixture as R134a replacement in a moderately-high temperature heat pump

Condensation heat transfer characteristics of R1234yf and other Refrigerants inside small-scale tube: An experimental study and heat transfer correlation development

Performance comparison of ejectors in ejector-based refrigeration cycles with R1234yf, R1234ze(E) and R134a

Experimental Investigation on Flow Boiling Heat Transfer and Pressure Drop of a Low-GWP Refrigerant R1234ze(E) in a Horizontal Minichannel

A Study of Low Global Warming Potential Refrigerants to Replace R123 for Chiller Application

Numerical Study of Condensation Heat Transfer Characteristics of R134a/R290 and R134a/R1270 Refrigerant Blends As Alternatives to Replace R404A