Abstract:In this study, the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy (HEA) were investigated by subjecting as-cast samples to cold rolling and annealing at different temperatures for 1 h. The as-cast and cold rolled HEAs show a single-phase face-centered cubic (FCC) structure. The annealing temperature has a noteworthy influence on the phase composition and microstructure of the cold rolled HEA, and the microstructural evolution is described as follows: heterogeneous microstructure with a FCC matrix and body-centered cubic (BCC) precipitates (750 ℃ and 850 ℃) → recrystallized microstructure with FCC matrix and BCC precipitates (950 ℃) → coarse grains with a single FCC phase (1050 ℃). Though the HEA annealed at 1050 ℃ has the best ductility and lowest coercivity, the yield strength is very low. A good combination of ductility and strength is found in the sample annealed at 850 ℃ (CR+HEA-850), whose microstructure is comprised of BCC precipitates, recrystallized FCC equiaxed grains and a few FCC hard-deformed lamellae. The heterogeneous structure of the CR+HEA-850 resulted in a strong back stress, which contributes to its good mechanical properties. The high yield strength came from the grain refinement, dislocation strengthening, Orowan effect, and twin boundaries. Additionally, its soft magnetic properties are also appealing, showing high saturated magnetization (112.4 emu/g) and good coercivity (8.7 Oe). Compared with the HEAs on other conditions in this study and those previously reported, the CR+HEA-850 displays an interesting combination of magnetic and mechanical performance, which offers a strategy towards a new generation of multifunctional high-entropy alloys.

Microstructure and magnetic properties evolution of Al/CoCrFeNi nanocrystalline high-entropy alloy composite

Macro-micro Analysis of Mechanical Properties of Al0.6CoCrFeNi High-Entropy Alloy Particle-Reinforced Al-based Composites

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Microstructure and Magnetic Properties of the FeCoNi(CuAl)0.8Ga0.06 High-Entropy Alloy During the Phase Transition

Microstructure evolution and mechanical properties of Al CoCrFeNi high-entropy alloys by laser melting deposition

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

Microstructure evolution and mechanical behavior of a CoCrFeNiMn0.75Cu0.25 high-entropy alloy by thermo-mechanical treatment

Comparative study of the microstructure and phase evolution of FeCoCrNiAl high-entropy alloy-matrix WC nanocomposite powders prepared by mechanical alloying

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Microstructure Evolution and Mechanical Property of Directionally Solidified CoCrFeMnNi High Entropy Alloy

Microstructure and Properties of Bulk Al0.5CoCrFeNi High-Entropy Alloy by Cold Rolling and Subsequent Annealing

Effect of Co on phase stability and mechanical behavior of CoxCrFeNiMnAl0.3 high entropy alloys with micro/nano hierarchical structure

Microstructure and mechanical properties of CrMnFeCoNi high entropy alloy/Al composite with different reinforcement content

Microstructural Evolution and Strengthening Mechanisms in CrxMnFeNi High-Entropy Alloy

Nanoscale phase separation in a fcc-based CoCrCuFeNiAl 0.5 high-entropy alloy

Microstructure and mechanical properties of AlCoCrFeMnNi HEAs fabricated by selective laser melting

Effects of Al Addition on Microstructure and Mechanical Properties of Alxcocrfeni High-Entropy Alloy

Nano-Structure Evolution and Mechanical Properties of AlxCoCrFeNi2.1 (x = 0, 0.3, 0.7, 1.0, 1.3) High-Entropy Alloy Prepared by Mechanical Alloying and Spark Plasma Sintering

Core-shell structure mediated microstructure and mechanical properties of high entropy alloy CoCrFeNi/Al composites

Evolution of the phase structure after different heat treatments in NiCoFeCrGa high entropy alloy

Microstructural Characterization and Mechanical Properties of an Al0.5CoCrFeCuNi High-Entropy Alloy in As-Cast and Heat-Treated/quenched Conditions