Abstract:Rapid advancement of novel optical spectroscopy and imaging systems relies on the availability of well-characterised and reproducible protocols for phantoms as a standard for the validation of the technique. The tissue-mimicking phantoms are also used to investigate photon transport in biological samples before clinical trials that require well-characterized phantoms with known optical properties (reduced scattering (μ's) and absorption (μa) coefficients). However, at present, there is limited literature available providing well-characterized phantom recipes considering various biomarkers and tested over a wide range of optical properties covering most of the human organs and applicable to multimodal optical spectroscopy. In this study, gelatin-based phantoms were designed to simulate tissue optical properties where India ink and Intralipid were used as absorbing and scattering agents, respectively. Multiple biomarkers were simulated by varying the gelatin concentration to mimic the change in tissue hydration and hydroxyapatite concentration to mimic bone signature. The recipe along with biomarkers were optimized and characterised over a wide range of optical properties (μa from 0.1 to 0.5 cm-1; μ's from 5 to 15 cm-1) relevant to human tissue using a broadband time-domain diffuse optical spectrometer. The data collected showed a linear relationship between the concentration of ink/lipids and μa/μ's values with negligible coupling between μa and μ's values. While being stored in a refrigerator post-fabrication, the μa and μ's did not change significantly (<4% coefficient of variation, 'CV') over three weeks. The reproducibility in three different sets was validated experimentally and found to be strong with a variation of ≤6% CV in μa and ≤9% CV in μ's. From the 3 × 3 data of μa and μ's matrices, one can deduce the recipe for any target absorption or reduced scattering coefficient. The applicability of the phantoms was tested using diffuse reflectance and Raman spectrometers. A use case application was demonstrated for Raman spectroscopy where hydration and hydroxyapatite phantoms were designed to characterize the Raman instrument. The Raman instrument could detect the change in 1% of HA and 5% of hydration. This study presents a first-of-its-kind robust, well-characterized, multi-biomarker phantom recipe for calibration and benchmarking of multimodal spectroscopy devices assisting in their clinical translation.

Design of eye phantom for optical coherence tomography angiography study

A Multiparameter Tissue-Mimicking Phantom for Multispectral Endoscopic Imaging

Endoscopic Optical Coherence Tomography Angiography Using Inverse SNR-amplitude Decorrelation Features and Electrothermal Micro-Electro-mechanical System Raster Scan

Fabrication of Tuneable Tissue-Mimicking Phantom for Optical Methods

Geometrically complex 3D-printed phantoms for diffuse optical imaging

Fabrication and Characterization of Brain Tissue Phantoms Using Agarose Gels for Ultraviolet Vision Systems

Fabrication and characterization of multi-biomarker optimized tissue-mimicking phantoms for multi-modal optical spectroscopy

Development of A Percutaneous Optical Imaging System for Tracking Vascular Gene Expression: A Feasibility Study Using Human Tissue Like Phantoms

Automatic Design and Fabrication of a Custom Ocular Prosthesis Using 3D Volume Difference Reconstruction (VDR)

Three-Dimensional In Vivo Imaging Of Human Anterior Eye Segment With Optical Coherence Tomography

Development of eye phantom for mimicking the deformation of the human cornea accompanied by intraocular pressure alterations

Design of 1300 Nm Spectral Domain Optical Coherence Tomography Angiography System for Iris Microvascular Imaging

Development of a microstructured tissue phantom with adaptable optical properties for use with microscopes and fluorescence lifetime imaging systems

Tissue mimicking materials and finger phantom design for pulse oximetry

Advances in nondestructive optical characterization techniques for engineered eye-on-a-chip devices: A comprehensive review

Compact Linear Flow Phantom Model for Retinal Blood-Flow Evaluation

Design of a head phantom produced on a 3D rapid prototyping printer and comparison with a RANDO and 3M lucite head phantom in eye dosimetry applications

Controlling for Artifacts in Widefield Optical Coherence Tomography Angiography Measurements of Non-Perfusion Area

Optical Coherence Tomography Angiography for Anterior Segment Vasculature Imaging

Development and optical characterisation of agarose-based phantoms mimicking biological tissues for studies of light penetration in the brain

Quantitative measurements of intraocular structures and microinjection bleb volumes using intraoperative optical coherence tomography