Abstract:Due to their great efficiency and minimal loss, self-priming jet pumps are frequently employed in a variety of sectors for sustainable development. A short jet self-priming pump's steady and unsteady flow characteristics are investigated numerically in this study using a standard k-ε turbulence model. The precision and dependability of the numerical calculations used in this work are demonstrated by the less than 2% difference between the pump performance data from the numerical calculation and the external characteristics test results for each flow condition. It was found that due to the perpendicularity of the nozzle axis to the impeller axis, the high-flow velocity zone in the nozzle gradually deviates to the side away from the impeller under high-flow conditions. Backflow is generated on the side close to the impeller, where eccentric vortices are created. As time progresses, the asymmetry of the low-pressure zone within the impeller becomes more pronounced under high-flow conditions, and the fluid is unable to form a stable vortex structure at a specific location. This is an important cause of impeller vibration and noise. The nonlinear vibration at the impeller inlet is less periodic, while the increase in flow rate can make the nonlinear vibration generated within the impeller more regular and stable. This reflects the fact that the fluid flow at small flow rates is more likely to be affected by the blade configuration and the shape of the flow channel, which leads to fluid instability and discontinuity. For various flow rates, the main frequency of the pressure pulsation is higher at the impeller intake (W1) than it is in the impeller channel (W2~7). Additionally, the pressure pulsation is more frequent before 10 times the rotational frequency, with no significant regularity. This suggests that the impeller and injector rear chamber dynamic and static interference impacts may have some bearing on the pressure pulsation. The pressure pulsation coefficients (W2~7) in the impeller at different flow rates show an exponentially decreasing trend with the increase of multiples of five in the rotation frequency. The equations for the relationship between CP and 5NF were obtained, respectively: CP-Q1 = 0.07044 × exp(−0.2372NF), CP-Q3 = 0.06776 × exp(−0.2564 NF), CP-Q5 = 0.07005 × exp(−0.2884 NF). The findings of this study contribute to understanding the flow inhomogeneities inside the pump as well as the analysis of the internal pump vibration, enhancing the jet pump's efficiency and lifespan.

Numerical investigations of flow characteristics of a pumpjet propulsor in oblique inflow

Effect of Taper Angle on the Performance of Jet Pumps for a Loop-Structured Thermoacoustic Engine

CFD Simulation and PIV Measurement of the Flow Field Generated by Modified Pitched Blade Turbine Impellers

Experimental and numerical investigations on pressure pulsation in a pump mode operation of a pump as turbine

Excitation Force on a Pump-Jet Propeller: the Effect of the Blade Number

Numerical Investigation of Influence of Rotor-Rotor Gap on Performances of Contra-Rotating Axial Flow Pump

Suppression Method for Exciting Force of Pump Jet Propellers Based on Sinusoidal Unevenly Spaced Rotor Blades

Numerical study of the hydrodynamic performances of surface piercing propeller

Investigation on the performance of a ducted propeller in oblique flow

Sources and mechanisms of flow loss and hydroacoustics in a pre-swirl stator pump-jet propulsor

Numerical Simulation of Flow in Centrifugal Pump with Complex Impeller

Numerical simulation of vortex instabilities in the wake of a preswirl pumpjet propulsor

Investigation of Flow Separation Characteristics in a Pump as Turbines Impeller Under the Best Efficiency Point Condition

Wake flow characteristics and unsteady performance of a pump-jet propulsor under hull condition

Comparison of the hydrodynamic performance of front and rear-stator pump-jet propulsors in an oblique wake under the cavitation condition

Effects of the stator prewhirl angle on the unsteady force under uniform and turbulent inflow for a pump-jet propulsor: a numerical study

Numerical simulation on the hydrodynamic performance of an azimuthing pushing podded propulsor in reverse flow and rotation

Investigations into the unsteady internal flow characteristics for a waterjet propulsion system at different cruising speeds

Numerical study on the hydrodynamic performance and wake dynamics of propulsive wing propulsors with different cross-flow fans

Study on rotor–stator interaction in a pump-jet propulsor based on dynamic mode decomposition

Steady and Unsteady Flow Characteristics inside Short Jet Self-Priming Pump