Abstract:In recent years, perovskite solar cell (PSC) has achieved power conversion efficiency as high as over 20 %, making it competitive with high-efficiency thin film solar cells such as CuInGaSe and CdTe solar cells. However, the critical issue of reliability and stability for PSC should be addressed since a significant degradation of photovoltaic (PV) performance at low temperature has been found regardless of planar mesoporous PSC. To reveal the degradation of PV performance in PSC, the temperature-dependent PV performance of the planar PSC is investigated in detail. A PSC sample is loaded into a cryostat chamber connected to a compressor and illuminated by a halogen lamp. The operating temperature varies from 200 K to 325 K and the current-voltage (J-V) characteristic of planar PSC is measured at different scan rates from 10 V/s to 0.0017 V/s. At a fast scan rate of 10 V/s, the PSC shows a low PV performance at either low temperature or high temperature. The short-circuit current (J(SC)), open-circuit voltage (V-OC) and maximum power point (P-MPP) are found to decline with the temperature decrteasing. Moreover, the J-V curve also shows the S-shape characteristic. This suggests that the inefficient transport of photo-generated carriers occurs in the PSC. Ions such as Pb2+, CH3NH(3+) and I-vacancies cause the screening effect of built-in field and the photo-generated carriers cannot be separated nor collected efficiently. As a result, J(SC) and V-OC show small values in J-V curves measured at a fast scan rate. However, the degradation in PV performance is temporary. The PV performance gradually reaches a steady state at different operating temperatures with scan rate going down to 0.0017 V/s. The P-MPP and V-OC increase with temperature decreasing. These results indicate that a long illumination time is necessary for PSC to reach a steady state. After long-time illumination under biased condition (i.e., J-V curves measured at slow scan rate), the built-in field is compensated for by the external bias and the ions piling in the interface regions have enough time to diffuse towards the opposite direction. Thus, the screening effect of built-in field is reduced and the PV performance of PSC reaches a steady state. According to the result of device simulation, the increasing V-OC at low temperature is attributed to the enhanced built-in potential difference and the reduced recombination rate of carriers. The temperature-dependent external quantum efficiency measurements of planar PSC before and after light illuminationis are performed to investigate the mechanism of carrier transport. It reveals that the separation and collection efficiencies of photo-generated carriers can be improved significantly after light illumination due to the fact that the screening effect of built-in field is reduced. These findings help understand the carrier transport mechanism in planar PSC.

Characteristics of Perovskite Solar Cells under Low-Illuminance Conditions

Temperature Dependent Characteristics of Perovskite Solar Cells

Impermeable inorganic “walls” sandwiching perovskite layer toward inverted and indoor photovoltaic devices

Insights into the photovoltaic mechanism of organic photovoltaics under solar and artificial light

Impermeable Inorganic Walls Sandwiching Photoactive Layer toward Inverted Perovskite Solar and Indoor-Photovoltaic Devices

Efficiency Potential and Voltage Loss of Inorganic CsPbI2Br Perovskite Solar Cells

Enhancement of exciton separation in indoor perovskite photovoltaics by employing conjugated organic chromophores

High Shunt Resistance SnO 2 ‐PbO Electron Transport Layer for Perovskite Solar Cells Used in Low Lighting Applications

Elucidating the Evolution of the Current-Voltage Characteristics of Planar Organometal Halide Perovskite Solar Cells to an S-Shape at Low Temperature

Ion‐Dipole Interaction Enabling Highly Efficient CsPbI3 Perovskite Indoor Photovoltaics

Temperature-Dependent Time Response Characteristic of Photovoltaic Performance in Planar Heterojunction Perovskite Solar Cell

Key Parameters and Thresholds Values for Obtaining High Performance Perovskite Solar Cells Indoors from Full Br Compositional and Bandgap Engineering

Unveiling the Low‐Temperature Pseudodegradation of Photovoltaic Performance in Planar Perovskite Solar Cell by Optoelectronic Observation

Performance and stability of hybrid organic-inorganic Perovskite Photovoltaics in Outdoor Illuminations Conditions

Self-Elimination of Intrinsic Defects Improves the Low-Temperature Performance of Perovskite Photovoltaics

Exploration of Triple Cation Perovskite Landscape via Cs and Br Tuning to Achieve Functional Ultralow-Hysteresis and High-Performance Indoor Perovskite Solar Cell with Low-Cost Carbon-Based Electrode

Low Frequency Carrier Kinetics in Perovskite Solar Cells

Fulleropyrrolidinium Iodide As an Efficient Electron Transport Layer for Air-Stable Planar Perovskite Solar Cells

OPTIMIZATION OF THE PEROVSKITE SOLAR CELL STRUCTURE

Minimized surface deficiency on wide-bandgap perovskite for efficient indoor photovoltaics

The Characteristics of Perovskite Solar Cells Fabricated Using DMF and DMSO/GBL Solvents