Abstract:Well characterised sources of thermal radiation are essential for photometry, radiometry, and thermometry. They serve as reference radiators for the calibration of detectors and radiance sources. Thermal radiation sources are advantageous for this purpose compared to other radiance sources such as lamps or LEDs because they possess a continuous spectrum of the emitted spectral radiance, which, for blackbody sources, can be calculated analytically using Planck’s law of radiation.For application in thermometry, blackbody sources starting from temperatures near absolute zero to temperatures up to 3000 ∘C are needed for the calibration of radiation thermometers. For application in photometry and radiometry high intensity sources of radiation in the visible and UV region of the optical spectrum were required. This latter requirement is met by blackbody sources at temperatures well above 2000 ∘C. An ideal reference source should always emit the same amount of radiation at any time of use. This is realised by fixed-point radiators. Such radiators are based on a phase transition of a substance, at high temperatures the melting and freezing points of metals. However, current metal fixed-points are limited to relatively low temperatures. In the present work innovative techniques necessary for research into high-temperature thermal radiation sources are developed and thoroughly described. Starting with variable temperature blackbody sources the techniques required are: Precise apertures determination and detailed characterisation of the applied optical detectors.The described techniques are then used to undertake research into the development of high-temperature fixed-points above the copper fixed-point for application in photometry, radiometry, and thermometry. Applying these sophisticated techniques it was shown that these new high-temperature fixed-points are reproducible and repeatable to better than 100 mK at temperatures up to nearly 3200 K. Finally, a forward look is given that shows the potential of such fixed-points for improving traceability and accuracy in photometry, radiometry, and thermometry. This work forms the foundation for accurate and practical applications of high-temperature fixed-point sources and sets the international benchmark for measurement techniques in photometry, radiometry, and thermometry. This work will open the use of the novel high-temperature fixed-points in an improved International Temperature Scale and will significantly improve and ease the realisation and dissemination of the SI base unit candela, significantly reducing the uncertainty for industrial measurements in these fields.

An emf-temperature reference function for Pt-20%Rh versus Pt thermocouples in the temperature range of 0 °C to 1100 °C

Preparation and Thermoelectric Characteristics of ITO/PtRh:PtRh Thin Film Thermocouple

Non-contact temperature measurement at the Physikalisch-Technische Bundesanstalt (PTB)

Fabrication and Calibration of Pt-Rh10/Pt Thin-Film Thermocouple

Metal-carbon eutectic high temperature fixed points for in-situ calibration of radiation thermometers

In situ synchrotron X-ray diffraction with laser-heated diamond anvil cells study of Pt up to 95 GPa and 3150 K

P-V-T Equation of State of Platinum to 80 Gpa and 1900 K from Internal Resistive Heating/X-Ray Diffraction Measurements

Supplementary comparison on a platinum resistance thermometer calibration from -70 °C to 250 °C

Behavior Of Thermocouples Under High Pressure In A Multi-Anvil Apparatus

Thermodynamic Temperature Measurements of Silver Freezing Point and Htfps

Precision measurements of the thermal conductivity, electrical resistivity, and Seebeck coefficient from 80 to 400 K and their application to pure molybdenum

Thermoelectrical Properties of ITO/Pt, In2O3/Pt and ITO/In2O3 Thermocouples Prepared with Magnetron Sputtering

Experimental study of chromium oxide thin films as an intermediate layer for Pt-based temperature sensor applications

Measuring spectral emissivity up to 4000 K

Development and Evaluation of Temperature Sensing Smart Skin for High-Temperature Measurements in Pipes

High-temperature measurement techniques for the application in photometry, radiometry and thermometry

SIM.T-K9.3: Standard platinum resistance thermometer ITS-90 realizations from the Hg triple point to the Zn freezing point

High temperature measurement set-up for the electro-mechanical characterization of robust thin film systems

Temperature coefficient of resistance and thermal boundary conductance determination of ruthenium thin films by micro four-point probe