Abstract:In laser-arc hybrid welding, the appropriate position between the laser beam and arc will be helpful in forming an intensive interaction and significantly increasing penetration depth. In this paper, first, an orthogonal experiment with three factors and four levels were carried out on the inclination angle of the welding torch, the arc length, and the distance between laser beam and TIG electrode, Dla, to find the optimal positional parameters with the strongest laser-arc interaction. The composite plasma behaviors and interaction mechanism between laser and arc were then analyzed under different position parameters; on this basis, the influence of laser power on the laser-arc interaction was further analyzed. Results reveal that the interaction is a decided difference under different positions. When the distance Dla is small, the arc will be significantly compressed; when the laser acts on the arc center, the pre-heating of the arc will greatly improve the laser absorption rate, a shorter arc length will help to further increase the penetration. When the distance Dla, the arc length, and the welding torch angle are 1.5, 1 mm, and 45, respectively, the laser-arc interaction reaches its strongest level and the weld penetration is the deepest. In this case, the arc tail is obviously shortened, and the laser-arc composite plasma volume in the central region is greatly increased. Further, when the laser-power percentage is 10%-50%, the weld profile shows the characteristics of laser heat-conduction welding; when the laser-power percentage is 50%-80%, the weld profile shows the characteristics of laser deep penetration welding; and when the laser-power percentage is 80%-100%, the valid penetration is shallow and accompanied by a large splash due to the very short laser duration. But the weld profile should also be characterized by typical laser deep-penetration welding when the duration of laser action is enough long.

Formation mechanism of double-critical effect in hollow tungsten arc coaxially assisted by fiber laser welding

Effects of Coupling Between the Laser Plasma and Two Arcs on Metal Transfer in CO2 Laser Double-Wire MIG Hybrid Welding

Effects of heat source configuration on the welding process and joint formation in ultra-high power laser-MAG hybrid welding

Stability enhancement of molten pool and keyhole for 2195 Al Li alloy using fiber-diode laser hybrid welding

Numerical Study of the Effect of Laser-Arc Distance on Laser Energy Coupling in Pulsed Nd: YAG Laser/tig Hybrid Welding

Effect of Relative Position in Low-Power Pulsed-Laser–tungsten-inert-gas Hybrid Welding on Laser-Arc Interaction

Study on Coupling Mechanism and Metal Transfer in Laser Double-Wire MIG Arc Hybrid Welding

The influence of the arrangement for fiber laser and TIG on the hybrid welding process

Experimental Study on Welding Characteristics of Co2 Laser Tig Hybrid Welding Process

Double-sided Fiber Laser Beam Welding Process of T-joints for Aluminum Aircraft Fuselage Panels: Filler Wire Melting Behavior, Process Stability, and Their Effects on Porosity Defects

Effect of Heat Source Order on Coupling Mechanism and Mechanical Properties of Joints in Laser-Arc Hybrid Welding of HG785D High-Strength Steels

Characteristics of droplet transfer, molten pool formation, and weld bead formation of oscillating laser hot-wire tungsten inert gas hybrid welding

Effect of energy parameters on droplet transfer behavior and weld formation in laser-arc hybrid welding with cable-type welding wire

Study of Welding Characteristics in CO2 Laser-Tig Hybrid Welding Process

Effect of liquid column on process stability and weld formation under ultra-high power fiber laser-arc hybrid welding of thick plates

Influence of the Laser Thermal Effect on the Droplet Transfer Behavior in Laser-Cmt Welding

Effect of the Welding Direction on the Microstructural Characterization in Fiber Laser-Gmaw Hybrid Welding of 5083 Aluminum Alloy

Fiber Laser Welding of HSLA Steel by Autogenous Laser Welding and Autogenous Laser Welding with Cold Wire Methods

Laser spot welding of LF6 aluminum with double laser beams

Mechanism and optimization of femtosecond laser welding fused silica and aluminum

Effect of laser parameters on arc behavior of laser-TIG double-side welding for aluminum alloy