Abstract:The control algorithm could greatly help the suspension system improve the comprehensive performance of the vehicle. Existing control methods need to obtain the intermediate states, which are difficult to obtain directly or accurately when estimated by filters or observers. Thus, this paper proposed a new practical finite state LQR control method to deal with this problem. By combining with the output state of the finite sensor of the vehicle suspension system and weakening the unknown state as the goal, an optimization model is established with the design variables as the LQR weight coefficients. Then, the direct relationship between the current control input and the finite sensor output is obtained, and the finite state LQR control is realized. Taking the quarter-car suspension model as an example, the corresponding noise is added considering sensor accuracy, and the control performance of the four control methods is studied considering the uncertainties of suspension system parameters. In addition, the acceleration of sprung mass and the dynamic travel coefficient of suspension have been separately calculated by methods of finite state LQR control, LQR control, and PID control. The results show that there is not much difference between them under shock excitation or random excitation. However, the finite state LQR control method has the best comprehensive control performance in that its dynamic tire load coefficient is better than other methods; it could take into account the suspension work stroke coefficient, dynamic tire load coefficient, and sprung mass' acceleration of the vehicle suspension system at the same time. In order to realize the optimal control effect with limited sensor arrangement, the finite state LQR control method only needs to obtain the current sensor output and the current control input, without estimating the unknown intermediate state. By this means, the proposed control method greatly simplifies the design of the control system and has great advantages on practical value.

Adaptive control for trailing arm suspension with hydraulic cylinder spring under practical constraints

Decoupled Adaptive Terminal Sliding Mode Control Strategy for a 6-DOF Electro-Hydraulic Suspension Test Rig with RBF Coupling Force Compensator

Functional Based Adaptive and Fuzzy Sliding Controller for Non-Autonomous Active Suspension System

Active Suspension Control of Quarter-Car System With Experimental Validation

Model-free adaptive sliding controller for automotive active suspensions

Adaptive Sliding Controller with Self-Tuning Fuzzy Compensation for Vehicle Suspension Control

A New Model-Free Adaptive Sliding Controller for Active Suspension System.

Optimal Control of Semi-Active Suspension for Agricultural Tractors Using Linear Quadratic Gaussian Control

Performance evaluation and analysis for hydraulic active suspension using the collaborative control method

LQR force command planning–based sliding mode control for active suspension system

LMI-based robust model predictive control for a quarter car with series active variable geometry suspension

Semi-Active Suspension Adaptive Control Strategy Based on Hybrid Control

Strongly perturbed sliding mode adaptive control of vehicle active suspension system considering actuator nonlinearity

Linear Quadratic Optimal Control with the Finite State for Suspension System

Robust control design for active suspension system with uncertain dynamics and actuator time delay

Adaptive constrained control of half-car active suspension system with actuator failures

Global optimization control for nonlinear full‐car active suspension system with multi‐performances

A new hybrid control strategy for improving ride comfort on lateral suspension system of railway vehicle

Adaptive ride height controller design for vehicle active suspension systems with uncertain sprung mass and time‐varying disturbance

Optimal Control of an Active Suspension System Applying Distributed Parameter Simulation Test

A lateral and longitudinal control method based on linear quadratic regulator for intelligent vehicles considering future path changes