Abstract:P2-type layered oxides are considered as promising cathode materials for rechargeable sodium ion batteries, but preparing P2-type cathodes with high-operating voltage and long-life is still a big challenge. Herein, spherical P2-type cathode Na0.67Ni0.17Co0.17Mn0.66Ti0.05Mg0.05O2 has been designed, and the critical roles of Ti and Mg on electrochemical performance of the cathodes are systematically investigated. The high-temperature XRD clearly exhibits the forming process of the pure phase material and suggests that the most suitable calcination temperature is 850 °C. The Ti/Mg cosubstitution does not break the long-range P2 structure and the spherical morphology of the material. In the electrochemical processes, the Na0.67Ni0.17Co0.17Mn0.56Ti0.05Mg0.05O2 electrode exhibits better electrochemical performance than that of the undoped Na0.67Ni0.17Co0.17Mn0.66O2. It delivers an initial reversible capacity of 151 mAh g–1 (2–4.5 V) with an average voltage of 3.8 V and exhibits a high capacity retention of 87.7% after 300 cycles at 100 mA g–1. The improved electrochemical performance benefits from the Ti/Mg cosubstitution; Ti improves the average voltage while Mg and Ti significantly mitigate the undesired P2 → O2 phase transition of the cathode, and these two elements jointly promote the development of the electrochemical performance. This strategy is also applicable to the optimization design of layered transition oxides and provides a new approach to prepare high-voltage, long-life cathodes for sodium ion batteries.This article has not yet been cited by other publications.

New layered metal oxides as positive electrode materials for room-temperature sodium-ion batteries

La-doped O3-type Layered Oxide Cathode with Enhanced Cycle Stability for Sodium-Ion Batteries

Na 5/6 [Ni 1/3 Mn 1/6 Fe 1/6 Ti 1/3 ]O 2 as an Optimized O3-Type Layered Oxide Positive Electrode Material for Sodium-Ion Batteries

Design of Cu-Substituted O3-Type NaFe0.5 Mn0.5 O2 Cathode Materials for Sodium-Ion Batteries

O3-Type Layered Ni-Rich Oxide: A High-Capacity and Superior-Rate Cathode for Sodium-Ion Batteries

O3-type layered transition metal oxide Na(NiCoFeTi)1/4O2 as a high rate and long cycle life cathode material for sodium ion batteries

Fe‐Based Tunnel‐Type Na0.61[Mn0.27Fe0.34Ti0.39]O2 Designed by a New Strategy As a Cathode Material for Sodium‐Ion Batteries

O3-Type Na 0.95 Ni 0.40 Fe 0.15 Mn 0.3 Ti 0.15 O 2 Cathode Materials with Enhanced Storage Stability for High-Energy Na-Ion Batteries

Trace Ti/Mg Co-Doped O3-type Layered Oxide Cathodes with Enhanced Kinetics and Stability for Sodium-Ion Batteries

Biphasic high-entropy layered oxide as a stable and high-rate cathode for sodium-ion batteries

Na-Rich Layered Transition Metal Oxides with Core/Shell Structures for Improved Performance of Sodium-Ion Batteries

Facile design and synthesis of Co-free layered O3-type NaNi0.2Mn0.2Fe0.6O2 as promising cathode material for sodium-ion batteries

Research progresses in O3-type Ni/Fe/Mn based layered cathode materials for sodium ion batteries

A Stable Layered Oxide Cathode Material for High‐Performance Sodium‐Ion Battery

Depressed P3-O3' phase transitions in O3-type layered cathode for advanced sodium-ion batteries

High-Entropy Layered Oxide Cathode Enabling High-Rate for Solid-State Sodium-Ion Batteries

Regulating the local chemical environment in layered O3-NaNi0.5Mn0.5O2 achieves practicable cathode for sodium-ion batteries

A high-capacity, low-cost layered sodium manganese oxide material as cathode for sodium-ion batteries.

A Universal Strategy toward Air‐Stable and High‐Rate O3 Layered Oxide Cathodes for Na‐Ion Batteries

High-Operating Voltage, Long-Life Layered Oxides for Sodium Ion Batteries Enabled by Cosubstitution of Titanium and Magnesium