Abstract:a r t i c l e i n f o Sodium Na-ion battery We report a new layered Na(Mn 0.25 Fe 0.25 Co 0.25 Ni 0.25)O 2 compound with O3 oxygen stacking. It delivers 180 mAh/g initial discharge capacity and 578 Wh/kg specific energy density with good cycling capability at high cutoff voltage. In situ X-ray diffraction (XRD) shows a reversible structure evolution of O3-P3-O3′-O3″ upon Na de-intercalation. The excellent capacity and cycling performance at high cutoff voltage make it an important model system for studying the general issue of capacity fading in layered Na cathode compounds. Layered sodium metal oxides have attracted considerable interest as cathodes for Na-ion batteries partly due to the fact that all seven layered NaTMO 2 with the O3-structure, where TM is a single oxidizable 3d transition metal ion from Ti, V, Cr, Mn, Fe, Co, Ni [1], can be easily synthesized , and show the capability to intercalate Na ions reversibly [2–7]. This is very different from their Li analogues, where only LiCoO 2 and LiNiO 2 reversibly intercalate Li ions [8]. Furthermore, different transition metal ions can be easily mixed in the TM layer to make new NaTMO 2 compounds [9–15]. Among them, O3-Na(Fe 0.5 Co 0.5)O 2 (denoted hereafter as FC) shows a capacity around 160 mAh/g with excellent capacity retention when cycled below 4.0 V and an average voltage of 3.14 V [11]. O3-Na(Ni 0.5 Mn 0.5)O 2 (denoted hereafter as NM) shows an initial discharge capacity of 185 mAh/g and average voltage of 3.22 V, partly due to a long high voltage plateau around 4.0 V [12,16]. But capacity retention of NM is poor if the 4.0 V plateau is included in the galvanostatic cycling. We report here in this communication a new quaternary O3-structured compound with composition Na(Mn 0.25 Fe 0.25 Co 0.25 Ni 0.25)O 2 (denoted hereafter as MFCN), with theoretical capacity of 239 mAh/g and initial discharge capacity of 180 mAh/g over an average discharge voltage of 3.21 V. More importantly, its capacity retention is significantly improved over NM and FC even when cycled with high charge voltage cutoff. In-situ lab X-ray diffraction (XRD) to reveal the structure evolution of MFCN in the first electrochemical cycle shows a reversible O3-P3-O3′-O3″ phase transformation. Our result shows the opportunity to further improve the electrochemical performance of layered NaTMO 2 compounds by designing new combinations of transition metal ions …

O3-type layered transition metal oxide Na(NiCoFeTi)1/4O2 as a high rate and long cycle life cathode material for sodium ion batteries

La-doped O3-type Layered Oxide Cathode with Enhanced Cycle Stability for Sodium-Ion Batteries

A quinary layer transition metal oxide of NaNi1/4Co1/4Fe1/4Mn1/8Ti1/8O2 as a high-rate-capability and long-cycle-life cathode material for rechargeable sodium ion batteries

Trace Ti/Mg Co-Doped O3-type Layered Oxide Cathodes with Enhanced Kinetics and Stability for Sodium-Ion Batteries

Na-deficient O3-type Cathode Material Na0.8[Ni0.3Co0.2Ti0.5]O2 for Room-Temperature Sodium-Ion Batteries

Na 2/3 Li 1/9 [Ni 2/9 Li 1/9 Mn 2/3 ]O 2 : A High-Performance Solid-Solution Reaction Layered Oxide Cathode Material for Sodium-Ion Batteries

NaTiOx‐modified high‐nickel layered oxide cathode for stable sodium‐ion batteries

O3-Type Layered Ni-Rich Oxide: A High-Capacity and Superior-Rate Cathode for Sodium-Ion Batteries

O3-Type Na 0.95 Ni 0.40 Fe 0.15 Mn 0.3 Ti 0.15 O 2 Cathode Materials with Enhanced Storage Stability for High-Energy Na-Ion Batteries

Sodium Storage Property and Mechanism of NaCr1/4Fe1/4Ni1/4Ti1/4O2 Cathode at Various Cut-off Voltages

High-Operating Voltage, Long-Life Layered Oxides for Sodium Ion Batteries Enabled by Cosubstitution of Titanium and Magnesium

P2/O3 biphasic Fe/Mn-based layered oxide cathode with ultrahigh capacity and great cyclability for sodium ion batteries

A Novel Ni-rich O3-Na[Ni0.60Fe0.25Mn0.15]O2 Cathode for Na-ion Batteries

Enhancing rate and stability performance of O3-type NiFeMnTi-based layered oxides via Sb/Co dual-doping

Stabilized O3‐Type Layered Sodium Oxides with Enhanced Rate Performance and Cycling Stability by Dual‐Site Ti4+/K+ Substitution

Air-Stable High-Entropy Layered Oxide Cathode with Enhanced Cycling Stability for Sodium-Ion Batteries

A high entropy O3-Na1.0Li0.1Ni0.3Fe0.1Mn0.25Ti0.25O2 cathode with reversible phase transitions and superior electrochemical performances for sodium-ion batteries

High-entropy configuration of O3-type layered transition-metal oxide cathode with high-voltage stability for sodium-ion batteries

Co 0 . 25 Ni 0 . 25 ) O 2 : A quaternary layered cathode compound for rechargeable Na ion batteries

Reversible OP4 phase in P2–Na2/3Ni1/3Mn2/3O2 sodium ion cathode

Biphasic high-entropy layered oxide as a stable and high-rate cathode for sodium-ion batteries