Abstract:O3-type layered oxide materials are being considered as one of the most promising cathodes for Na-ion batteries owing to their higher capacity, however, they usually suffer from structural damage at the highly desodiated state. To achieve the stable/high-capacity O3-type Na-ion cathodes, a series of Ni-rich O3–Na[NixFeyMn1-x-y]O2 (x = 0.6, 0.7 and 0.8) oxide cathodes were successfully prepared and the phase transitions at high voltage were systematically investigated. Combined with the electrochemical measurements and structural characterizations, the structural transitions from O3 to O′3, P3, O3″ phases during the Na+ (de)intercalation process were demonstrated in the voltage range of 2.0–4.2 V. Moreover, several reasons for the high-voltage capacity decay are revealed: 1) the thermodynamic instability of high-voltage phase due to less Na+ in the crystal structure; 2) large volume change during the high-voltage phase evolution with inferior Na+ diffusion kinetics; 3) formation of microcracks and cathode-electrolyte interphase on the surface of cathode particles. To address the above issues, a reasonable upper cut-off voltage of 4.0 V was set to prevent the formation of O3″ phase and reduce electrolyte decomposition, which leads to a high reversible capacity of ~152 mAh g−1 (~467 Wh kg−1) with a superior capacity retention of ~84% after 200 cycles at 0.5C, showing great Na storage performance. This work provides insights on the relationship of the structure-property for the further development of high-performance Ni-rich O3-type Na-ion cathodes.

O3-Type Layered Ni-Rich Oxide: A High-Capacity and Superior-Rate Cathode for Sodium-Ion Batteries

La-doped O3-type Layered Oxide Cathode with Enhanced Cycle Stability for Sodium-Ion Batteries

Na 2/3 Li 1/9 [Ni 2/9 Li 1/9 Mn 2/3 ]O 2 : A High-Performance Solid-Solution Reaction Layered Oxide Cathode Material for Sodium-Ion Batteries

A Novel Ni-rich O3-Na[Ni0.60Fe0.25Mn0.15]O2 Cathode for Na-ion Batteries

P2-Type Layered Na0.75Ni1/3Ru1/6Mn1/2O2 Cathode Material with Excellent Rate Performance for Sodium-Ion Batteries

Trace Ti/Mg Co-Doped O3-type Layered Oxide Cathodes with Enhanced Kinetics and Stability for Sodium-Ion Batteries

O3-type Na(Mn0.25Fe0.25Co0.25Ni0.25)O2: A Quaternary Layered Cathode Compound for Rechargeable Na Ion Batteries

A Novel P2/O3 Composite Cathode Toward Synergistic Electrochemical Optimization for Sodium Ion Batteries

Regulating the local chemical environment in layered O3-NaNi0.5Mn0.5O2 achieves practicable cathode for sodium-ion batteries

Biphasic high-entropy layered oxide as a stable and high-rate cathode for sodium-ion batteries

Design of Cu-Substituted O3-Type NaFe0.5 Mn0.5 O2 Cathode Materials for Sodium-Ion Batteries

P2-Type Layered Na 0.75 Ni 1/3 Ru 1/6 Mn 1/2 O 2 Cathode Material with Excellent Rate Performance for Sodium-Ion Batteries

O3-type layered transition metal oxide Na(NiCoFeTi)1/4O2 as a high rate and long cycle life cathode material for sodium ion batteries

A Universal Strategy toward Air‐Stable and High‐Rate O3 Layered Oxide Cathodes for Na‐Ion Batteries

Unlocking high-rate O3 layered oxide cathode for Na-ion batteries via ion migration path modulation

Core-Shell Layered Oxide Cathode for High-Performance Sodium-Ion Batteries

Clarification of underneath capacity loss for O3-type Ni, co free layered cathodes at high voltage for sodium ion batteries

Facile design and synthesis of Co-free layered O3-type NaNi0.2Mn0.2Fe0.6O2 as promising cathode material for sodium-ion batteries

NaTiOx‐modified high‐nickel layered oxide cathode for stable sodium‐ion batteries

Multi-ion doped P2/O3 biphasic layered oxides cathodes NaxNi0.2Mn0.55Cu0.14TiyZnzO2 for sodium-ion batteries

Na-Rich Layered Transition Metal Oxides with Core/Shell Structures for Improved Performance of Sodium-Ion Batteries