Abstract:We recently demonstrated that pseudoelastic NiTi tubes compressed axially buckle first into an axisymmetric wrinkling mode but subsequently collapse by progressive development of buckle lobes with three circumferential waves. This behavior is governed by the material nonlinearity associated with the austenite to martensite solid-state transformation. On unloading, the material transforms back to austenite, deformation is recovered, and the buckling lobes are erased (Jiang et al., 2016). The problem was simulated numerically using a constitutive model framework for the pseudoelastic behavior of NiTi based on a J2-type nonlinear kinematic hardening model with the back stress represented through a potential. The first generation of the model did not account for the significant tension/compression asymmetry exhibited by the material so the buckling response did not reproduce well the experiments underestimating the dissipated energy. In the present work the constitutive model is extended to include the tension/compression asymmetry. It is introduced through a weighted mix of two potentials that are calibrated to the tensile and compressive stress-strain responses of the material. In addition, the present model allows for plastic deformations at the completion of martensite transformation. Incorporation of the tension/compression asymmetry significantly improves the calculated response of the buckling and recovery of NiTi tubes both qualitatively and quantitatively. The addition of plastic deformations to the model further improves the predictions. The initial axisymmetric wrinkling and the switch to the buckling mode with three circumferential waves are now reproduced correctly, and so are the evolution of localized collapse and the recovery of deformation on unloading. Furthermore, the stress levels during collapse and recovery follow the experimental levels quite closely thus reproducing the energy dissipated.

The effect of axial–torsion coupling on the compressive collapse behavior of Kresling tubes

Modelling of Concrete-Filled Filament-Wound FRP Confining Tubes Considering Nonlinear Biaxial Tube Behavior

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Axial Crushing Behaviors of Composite Pre-Folded Tubes Made of KFRP/CFRP Hybrid Laminates

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Axial Crushing of Triangular Tubes

Quasi-Static Axial Compression of Triangular Steel Tubes

Axial compression performance and failure modes of 304 stainless-steel/GFRP hybrid tubes

Axial Crushing Behaviors of Multi-Cell Tubes with Triangular Lattices

Seismic Behavior of Steel Tube Confined RC Columns under Compression-Bending-torsion Combined Load

Theoretical and numerical study on axial crush of new extruded multi-cell tube

Mechanical Performance of Multi-Cell Thin-Walled Tubes under Static and Dynamic Axial Loading

Quasi-static Axial Compression of Thin-Walled Tubes with Different Cross-Sectional Shapes

Buckling and Recovery of Niti Tubes under Axial Compression

Frusta structure designing to improve quasi-static axial crushing performances of triangular tubes

Lateral Compression Behaviors of Thin-Walled Equilateral Triangular Tubes

Tube Collapse under Combined External Pressure, Tension and Bending

Energy Absorption of Folded Shrink Tubes with Gradient Stiffness

Size Effects in the Axial Tearing of Circular Tubes During Quasi-Static and Impact Loadings

Inward-Contracted Folding Element for Thin-Walled Triangular Tubes

Energy absorption of axially compressed thin-walled square tubes with patterns