Abstract:Based on efficiency and environmental concerns, the development of porous carbon from waste and biomass materials has attracted extensive attention as a novel approach. In this study, poplar sawdust was an inexpensive carbon precursor, sulfur-containing waste liquid (SCWL) was used as a modifier to turn waste into treasure, and potassium oxalate (K2C2O4) was a mild activator, successfully prepared N, S, O co-doped new porous activated carbon with excellent CO2 capture performance. The heteroatom doping and pore structure can be controlled by using SCWL and K2C2O4, and adjusting the activation temperature. The best sample (PCSK-2-3-800) prepared with SCWL and K2C2O4 showed excellent CO2 adsorption performance, reaching 3.82 and 5.61 mmol/g under normal pressure at 25 and 0 °C, respectively. This is attributed to the synergy of porous structure and surface chemistry. The pore structure parameter results showed that K2C2O4 promotes the development of activated carbon pore structure. The specific surface area, micropore volume and narrow micropore volume of PCSK-2-3-800 are 1418 m2/g, 0.55 cm3/g and 0.43 mL/g, respectively. The characterization results of FTIR and XPS showed that the addition of SCWL can successfully introduce heteroatoms into the carbon skeleton, and form CO2-philic active sites on the surface of the porous carbon. Both aspects promoted the adsorption of CO2. In addition, the PCSK-2-3-800 sample has a moderate adsorption heat of 27.13 kJ/mmol, good adsorption selectivity of CO2 and N2 is 13, and excellent recyclability, which is very promising for CO2 separation or storage. This paper develops a sustainable scheme for the first-time using biomass and SCWL to develop a new solid carbon adsorbent, which provides useful information and inspiration for capturing CO2.

Synthesis of nanoporous carbon from Ulva lactuca activated by eggshell for CO2 capture: a novel approach to waste valorization

Efficient CO<sub>2</sub> capture by a novel deep eutectic solvent through facile, one-pot synthesis with low energy consumption and feasible regeneration

Valorization of Waste Eggshell for CO2 Sorbents Production by Sol-Gel Citric Acid Treatment in a Fixed-Bed Reactor

Enhanced capture of waste and diluted CO2 by N/O-rich multilayered ultramicropores bio-carbon composites materials

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Development and CO2 capture of nitrogen-enriched microporous carbon by coupling waste polyamides with lignocellulosic biomass

Ultra-microporous cotton fiber-derived activated carbon by a facile one-step chemical activation strategy for efficient CO 2 adsorption

Mesoporous Carbon Stabilized MgO Nanoparticles Synthesized by Pyrolysis of MgCl2 Preloaded Waste Biomass for Highly Efficient CO2 Capture.

Porous Carbon for CO2 Capture Technology: Unveiling Fundamentals and Innovations

Waste foam to upcycled sponge-like porous carbon composites for efficient CO 2 capture and conversion

Microporous carbon nanoflakes derived from biomass cork waste for CO2 capture

Power-to-decarbonization: Mesoporous carbon-MgO nanohybrid derived from plasma-activated seawater salt-loaded biomass for efficient CO2 capture

Enhanced CO2 capture potential of UiO-66-NH2 synthesized by sonochemical method: experimental findings and performance evaluation

Design of biomass-based N, S co-doped porous carbon via a straightforward post-treatment strategy for enhanced CO2 capture performance

Low temperature and facile synthesis of nitrogen-doped hierarchical porous carbon derived from waste polyethylene terephthalate for efficient CO 2 capture

N/O-rich multilayered ultramicroporous carbon for highly efficient capture and conversion of CO2 under atmospheric conditions

Recent advancements in sustainable upcycling of solid waste into porous carbons for carbon dioxide capture

Biomass-based N-rich porous carbon materials for CO2 capture and in situ conversion.

Capturing CO2 through high surface area activated carbon derived from seed shells of Balanites aegyptiaca

Production of Sustainable Adsorbents for CO2 Capture Applications from Food Biowastes

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture