Abstract:The Earth’s surface roughness constitutes an important parameter in terrain analysis for studying different environmental and engineering problems. Authors gave different definitions and measures for the earth’s surface roughness that usually depend on exploitation of digital elevation data for its reliable determination. This research aimed at exploring the different approaches for defining and extraction of the Earth’s surface roughness from Airborne LiDAR Measurements. It also aimed at evaluating the effects of the window size of the standard deviation filter on the created roughness maps in downtown landscapes using three known approaches namely; standard deviation filtering of the Digital Elevation Model (DEM), standard deviation filtering of the slope gradient model and standard deviation filtering of the profile curvature model. In this context, different roughness maps have been created from Airborne LiDAR measurements of the City of Toronto, Canada using the three filtering approaches with varying window sizes. Visual analysis has shown color tones of small roughness values with smooth textures dominate the roughness maps from small window sizes of the standard deviation filter, however, increasing the window sizes has produced wider variations of the color tones and rougher texture roughness maps. The standard deviations and ranges of the roughness maps from LiDAR DEM have increased due to increasing the filter window size while the skewness and kurtosis have decreased due to increasing the window size, indicating that the roughness maps from larger window sizes are statistically more symmetrical and more consistent. Thus, kurtosis has decreased by 53% and 82% due to increasing the window size to 7 × 7 and 15 × 15 respectively. The standard deviations of the roughness maps from the slope gradient model have increased due to increasing the window size till 15 × 15 while they have decreased with more increases. However, skewness has decreased due to increasing the window size till 15 × 15 and the kurtosis has decreased with higher rate till window size of 11 × 11. In the roughness maps from the profile curvature model, the ranges and skewness have decreased by 93.6% and 82.6% respectively due to increasing the window size to 15 × 15 while, kurtosis has decreased by 58.6%, 76.3% and 93.76% due to increases in the filter window size to 5 × 5, 7 × 7 and 15 × 15 respectively.

Studies of Terrain Surface Roughness and its Effect on GNSS-R Systems Using Airborne Lidar Measurements

Surface Roughness and Spectral Analysis Using Airborne Lidar Digital Elevation Models (DEMs) for Modeling and Calibration/Validation of GNSS-R Land Returns

Response of GNSS-R on Dynamic Vegetated Terrain Conditions

Toward Terrain Effects on GNSS Interferometric Reflectometry Snow Depth Retrievals: Geometries, Modeling, and Applications

A Novel Analytical Formulation of the Correlation of GNSS-R Signals Scattered by a Natural Fractal Surface

Effective Surface Roughness Impact in Polarimetric GNSS-R Soil Moisture Retrievals

Remote measurement of surface roughness, surface reflectance, and body reflectance with LiDAR

Creation and Analysis of Earth’s Surface Roughness Maps from Airborne LiDAR Measurements in Downtown Urban Landscape

The GNSS-R Eddy Experiment II: L-band and Optical Speculometry for Directional Sea-Roughness Retrieval from Low Altitude Aircraft

GNSS Reflectometry:A Review of Theories and Empirical Applications in Ocean and Land Surfaces

Investigation on Geometry Computation of Spaceborne GNSS-R Altimetry over Topography: Modeling and Validation

Effect of Natural Terrain Object on Return Signal of Space Based Laser Altimeter

Scattering Properties of Non-Gaussian Ocean Surface with the SSA Model Applied to GNSS-R

Inversion of Terrain Slope and Roughness with Satellite Laser Altimeter Full-Waveform Data Assisted by Shuttle Radar Topographic Mission

Scale-dependent roughness parameters for topography analysis

Comparisons of five indices for estimating local terrain surface roughness using LiDAR point clouds

Assessment on Surface Roughness Models Based on Semantics and Profile Characteristics Matching

Centimeter-scale Surface Roughness of the Chang’E Landing Regions and Implications for Radar Scattering Mechanisms

Integrated Ground-Based SAR Interferometry, Terrestrial Laser Scanner, and Corner Reflector Deformation Experiments

Quantifying Surface Reflectivity for Spaceborne Lidar via Two Independent Methods

Multi-scale volumetric soil moisture detection from GNSS SNR data: Ground-based and airborne applications