The GNSS-R Eddy Experiment II: L-band and Optical Speculometry for Directional Sea-Roughness Retrieval from Low Altitude Aircraft

O. Germain,G. Ruffini,F. Soulat,M. Caparrini,B. Chapron,P. Silvestrin

DOI: https://doi.org/10.48550/arXiv.physics/0310093

2003-10-20

Abstract:We report on the retrieval of directional sea-roughness (the full directional mean square slope, including MSS, direction and isotropy) through inversion of Global Navigation Satellite System Reflections (GNSS-R) and SOlar REflectance Speculometry (SORES)data collected during an experimental flight at 1000 m. The emphasis is on the utilization of the entire Delay-Doppler Map (for GNSS-R) or Tilt Azimuth Map (for SORES) in order to infer these directional parameters. Obtained estimations are analyzed and compared to Jason-1 measurements and the ECMWF numerical weather model.

Atmospheric and Oceanic Physics,Geophysics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to retrieve the directional sea - roughness of the sea surface through Global Navigation Satellite System - Reflectometry (GNSS - R) and Solar - Reflectance Photometry (SORES) data, specifically including parameters such as Directional Mean - Square Slope (DMSS), direction and anisotropy. These parameters are of great significance for understanding the characteristics of the ocean surface and its relationship with factors such as wind speed and waves.

### Overview of Main Problems

1. **Comprehensive Description of Sea - Surface Roughness**:
- The paper aims to use GNSS - R and SORES data to derive the Directional Mean - Square Slope (DMSS) of the sea surface by inverting the entire Delay - Doppler Map (DDM) or Tilt Azimuth Map (TAM). This is a comprehensive description of sea - surface roughness, including total Mean - Square Slope (MSS), Azimuth of Slope Probability Density Function (SPA) and Slope Probability Density Function Anisotropy (SPI).

2. **Improving the Limitations of Existing Methods**:
- Traditional methods usually use only simple delay waveforms (1D delay maps) for inversion, ignoring more - dimensional information. The method proposed in this paper uses 2D products (DDM and TAM) with higher information content, so that it can estimate DMSS parameters more accurately.

3. **Verifying the Validity of the Model**:
- Researchers collected GNSS - R and SORES data through low - altitude flight experiments and compared them with the results of Jason - 1 satellite measurements and the European Centre for Medium - Range Weather Forecasts (ECMWF) numerical weather model to verify the validity and accuracy of the proposed inversion method.

### Formula Summary

- **Gaussian Model of Two - Dimensional Slope Probability Density Function (PDF)**:
\[
P(s)=\frac{e^{-\frac{1}{2}s^{\dagger}K^{-1}s}}{2\pi\sqrt{\det(K)}}
\]
where \(s^{\dagger} = [\partial\zeta / \partial x\quad\partial\zeta / \partial y]\) is the directional slope vector, and \(K\) is the slope second - moment matrix.

- **Calculation of K Matrix**:
\[
K = R_{\psi}\cdot\begin{bmatrix}mss_{u}&0\\0&mss_{c}\end{bmatrix}\cdot R_{-\psi}
\]
where \(R_{\psi}\) is the rotation matrix with a rotation angle of \(\psi\), and \(mss_{u}\) and \(mss_{c}\) are the Mean - Square Slopes along the principal axis and the secondary axis respectively.

- **GNSS - R Bistatic Radar Equation**:
\[
P(\tau,f)=\int dxdy\frac{G_{r}}{R_{t}^{2}R_{r}^{2}}\cdot\sigma_{0}\cdot\chi^{2}(\tau_{m}-\tau_{c}-\tau,f_{m}-f_{c}-f)
\]
where \(G_{r}\) is the receiving antenna pattern, \(R_{t}\) and \(R_{r}\) are the distances from the sea surface to the transmitter and the receiver respectively, \(\sigma_{0}\) is the reflectivity, \(\chi\) is the Woodward Ambiguity Function (WAF), \(\tau_{m}(x,y)\) and \(f_{m}(x,y)\) are the Delay - Doppler mappings, and \(\tau_{c}\) and \(f_{c}\) are the Delay - Doppler centers.

Through these formulas and methods, researchers can estimate sea - surface roughness parameters more accurately and explore their relationships with ocean environmental factors such as wind speed and waves.