Rapid and inexpensive production of silica nanoparticles for the improvement of transformer oil insulating properties

Palikela Ramachandramurthy,Venkatesh Yepuri

DOI: https://doi.org/10.1007/s00202-024-02629-9

IF: 1.63

2024-07-26

Electrical Engineering

Abstract:By scaling down scientific inquiry from a macroscopic level to a nanoscopic one, various existing problems in the disciplines of electricity, electronics, and mechanics were effectively overcome. Transformers are distinctive devices that have a reduced lifespan because of the oil they use having a low dielectric strength. This problem may be resolved by incorporating nanoparticles into the standard oil. Nevertheless, extensive research is always being conducted to achieve the economical production of nanoparticles for optimal usage. The main aim of this study is to explore the efficient and economical production of silica nanoparticles by sol–gel synthesis. The silica nanoparticles were analysed using X-ray diffraction, which revealed a prominent peak at Bragg angle 22 ° . This peak provides evidence for the presence of a hexagonal crystal structure in the nanoparticles. The Fourier transform infrared spectroscopy (FTIR) study of the synthesised nanoparticles reveals the existence of O–H, Si–O–Si, and Si–OH functional groups at wavenumbers of 2956 cm −1 , 1126 cm −1 , and 976 cm −1 , respectively. The morphology and particle size of silica nanoparticles were analysed using the field emission scanning electron microscopy method. The research revealed that the nanoparticles had a spherical morphology, with an average particle size of around 36 nm, and exhibited little aggregation. The optical band gap of silica nanoparticles was calculated by using the Kubelka–Munk method, which included evaluating reflectance data acquired from a UV–VIS–NIR spectrophotometer. The calculated value for the optical band gap is 5.1 electron volts (eV). Furthermore, the incorporation of nanoparticles into the host Naphthenic mineral oil resulted in an increase in the breakdown voltage from 58.3 to 69.3 kV, as determined by the Jiantong 6801 Automatic 50 Hz Electrical Breakdown Tester in accordance with the IEC60156 standard. The rise in numbers may be attributed to the silica nanoparticles capacity to collect unbound electrons.

engineering, electrical & electronic