Abstract:Microwave communication systems are being developed with the goal to achieve miniaturization and high reliability. There are urgent requirements for microwave dielectric materials to exhibit low sintering temperatures, excellent microwave dielectric properties, and prominent mechanical performance. However, simultaneously achieving these requirements is a significant challenge. These concerns have been addressed in the uniform ultra-fine-grained 0.95MgTiO3–0.05CaTiO3 ceramics with an average grain size of ~0.5 μm via a grain size engineering strategy. Interestingly, the sintering temperature in the unique two-step sintering method of 1250°C/1 min and 1130°C/10 h is much lower (200°C–300°C) than that obtained in the conventional sintering method reported previously (1400°C–1450°C). Excellent dielectric properties are achieved, with relative permittivity εr = 20.11, quality factor Q×f = 68,613 GHz, and temperature coefficient of resonant frequency τf = +1.81 ppm/°C. The bending strength σf, Vickers hardness Hv, and elastic modulus E reach up to 212.4 MPa, 10.1 GPa, and 200.7 GPa, respectively. These values are significantly enhanced over those of samples obtained via the conventional sintering method with an average grain size of ~2.5 μm. For the first time, uniform ultra-fine-grained microwave dielectric materials with excellent microwave dielectric properties and prominent mechanical performance were synthesized. This work provides a guideline for developing other high-performance microwave dielectric materials and makes a significant contribution to the miniaturization and high reliability of microwave dielectric devices.

Microwave field: Temperature-dependent dielectric properties and heating characteristics during the synthesis of alpha-tellurium dioxide

Microwave Dielectric Properties of Temperature Stable (1-X)srlaalo4-xtio2 Composite Ceramics

Microwave Dielectric Properties of BaO–TiO2–TeO2 Ternary System

Microwave dielectric properties of BaO–TiO 2 –TeO 2 ternary system

Structural , thermal and microwave dielectric properties of a novel microwave material Ba 2 TiGe

Microwave absorbing properties of metatitanic acid and metatitanic acid-titanium carbide mixtures for rutile titanium dioxide fabrication

Effects of Adding TEOS on Sintering Process, Morphology and Microwave Dielectric Properties of Y3Al5O12 Ceramics

Infrared spectra, Raman spectra, microwave dielectric properties and simulation for effective permittivity of temperature stable ceramics AMoO4-TiO2 (A = Ca, Sr)

Preparation of (ZrTiCoNiNb)Ox high-entropy oxide powders by microwave heating with thermal field modulation

Infrared spectra, Raman spectra, microwave dielectric properties and simulation for effective permittivity of temperature stable ceramics AMoO 4-TiO2 (A = Ca, Sr)

Grain size engineered 0.95MgTiO 3 –0.05CaTiO 3 ceramics with excellent microwave dielectric properties and prominent mechanical performance

Tailoring Temperature Stability of MgAl2O4 Microwave Dielectric Ceramic Via (cu0.5ti0.5)3+ Co-Substituted

Structure, microwave dielectric properties and bond characteristics of Mg2Ti1-x(Al1/2Ta1/2)xO4 ceramics

Microwave synthesis of BaTiO3 from BaCO3 and TiO 2

Microwave dielectric properties and chemical compatibility with alumina electrode of two novel ultra-low temperature firing ATeMoO6 (A = Mg, Zn) ceramics

Heating Behavior And Crystal Growth Mechanism In Microwave Field

Microwave Dielectric Properties and Low Sintering Temperature of Ba0.5Sr0.5TiO3–Mg2TiO4 Composites Synthesized in Situ by the Hydrothermal Method

Structural, Thermal and Microwave Dielectric Properties of the Novel Microwave Material Ba2TiGe2O8

Improvement in microwave dielectric properties of Sr 2 TiO 4 ceramics through post-annealing treatment

Microwave Synthesis of BaTiO<sub>3</sub> from BaCO<sub>3</sub> and TiO<sub>2</sub>

Structure and Microwave Dielectric Characteristics of Sr-2[Ti1-x(Al0.5Nb0.5)(x)]O-4 (x <= 0.50) Ceramics