Abstract:There are too many methods to enhance the performance of ceramic cutting tools. All the methods can be sorted into two types: inner modification and surface modification. One of the main method to the inner modification of ceramic cutting tools is dispersion strengthening. Usually, in order to enhance the performance of ceramic cutting tools, some dispersed phases of TiN, TiC or TiCN, Al2O3, and/or ZrO2, and so on, and/or some whiskers, or fibers were added into the ceramic matrixes. And the new types of cutting tools, which possessed much more excellent performance than the original ones, were called composite ceramic cutting tools. For the composite Si3N4-based ceramic, Al2O3-based ceramic, and TiCN-based cermet, the cutting efficiency could be enhanced to 3~10 times, compared with cemented carbide tools. And they can be used for rough and finish machining of various cast iron workpieces and hardened steels, respectively, including milling and planning. Ion implantation is a surface modification for ceramic cutting tools. With certain doses of metals, for example, titanium, zirconium and chromium, and so on, implanted into the ceramics, the hardness, Young’s modulus, fractural toughness, and bending strength, etc., can be enhanced. For Al2O3 and Si3N4 ceramics, the hardness, Young’s modulus, and bending strength increased with a maximum factor of 50%, and the flank wear decreased with a factor of 2~12, compared with the unimplanted ceramic cutting tools. However, the main shortcoming of ion implantation to modify ceramics is the thickness of modified layers. They are, usually, too thin for cutting tools. The so-called PHEDP, pulsed high energy density plasma, is another surface modification method for ceramic cutting tools proposed recently. With such method, much thicker coatings of TiN, TiCN and (Ti,Al)N, etc, were deposited onto Si3N4 and WC ceramic cutting tools.The main merits involved in high hardness and Young’s modulus of the coatings, low residual stresses, and good adhesive strength between the coatings and substrates. And the flank wear of the as-depositedtools decreased with a factor of 5~10.

Realization of complex-shaped and high-performance alumina ceramic cutting tools via Vat photopolymerization based 3D printing: A novel surface modification strategy through coupling agents aluminic acid ester and silane coupling agent

Vat photopolymerization-based 3D printing of complex-shaped and high-performance Al2O3 ceramic tool with chip-breaking grooves: Cutting performance and wear mechanism

Cutting performance and wear mechanism of zirconia toughened alumina ceramic cutting tools formed by vat photopolymerization-based 3D printing

Fabrication of Al2O3 ceramic cores with high porosity and high strength by vat photopolymerization 3D printing and sacrificial templating

Vat photopolymerization 3D printing of polymer-derived SiOC ceramics with high precision and high strength

Vat photopolymerization 3D printing of Al2O3 ceramic cores with strip‐shaped pores by using polyamide 6 fiber template

New approach to preparing near zero shrinkage alumina ceramic cores with excellent properties by vat photopolymerization

Additive manufacturing of flexible polymer-derived ceramic matrix composites

Customized Nanostructured Ceramics via Microphase Separation 3D Printing

Digital light processing‐based additive manufacturing of orientation‐controlled Al2O3 ceramics with improved damage tolerance

Surfaces Modification Of Ceramic Cutting Tools By Mevva Ion Implantation

In-situ Y3Al5O12 enhances comprehensive properties of alumina-based ceramic cores by vat photopolymerization 3D printing

Tomographic Volumetric Additive Manufacturing of Silicon Oxycarbide Ceramics

Vat Photopolymerization of Ceramic Parts: Effects of Carbon Fiber Additives on Microstructure and Mechanical Performance

Innovative ceramic paste for stereolithography additive manufacturing alumina core applied in turbine blade casting

Investigation on the Modification Methods to Ceramic Cutting Tools

Mechanical and dielectric properties of Si3N4/β-SiAlON composite ceramics fabricated by vat photopolymerization 3D printing technology

Fabrication of porous aluminum ceramics beyond device resolution via stereolithography 3D printing

Alumina-based ceramic cores prepared by vat photopolymerization and buried combustion method

On enhancing the manufacturability and conversion of additively manufactured polymer-derived ceramics