Abstract:Energy from biomass accounts for 70% of all renewables used for heat and electricity production. Such a significant share of biomass determines the need for the investigation of their mechanical properties, as most of the lignocellulosic material requires cutting, chipping or milling before its utilization for energy purposes. Therefore, the knowledge about cutting resistance, bending stiffness, and impact strength of the energy plants is very important. The values of these parameters are used in the proper selection of shredding machines and their elements, wrapping nets or determination of power demand during raw material conversion. This paper presents the results of research on the mechanical properties of selected energy plants. The scope of the research included three different plant species: Miscanthus × giganteus, Rosa multiflora, and Salix viminalis, investigated in terms of cutting resistance, bending stiffness and impact strength of stalks. The results showed that the average stalk cutting resistance for the rotation speed of 4200 RPM was 0.17 N·mm−2 for the Miscanthus × giganteus, 0.15 N·mm−2 for the Rosa multiflora and 0.2 N·mm−2 for the Salix viminalis. Meanwhile, for a rotation speed of 3200 RPM, the cutting resistance amounted to 0.15 N·mm−2 for Miscanthus × giganteus, 0.16 N·mm−2 for Rosa multiflora and 0.18 N·mm−2 for Salix viminalis. For the impact measurements, the Salix viminalis exceeded 40 J·mm−2 of absorbed energy. Meanwhile, the average impact strength value for the Rosa multiflora was 0.53 J·mm−2 and for the Miscanthus × giganteus was 0.22 J·mm−2. The bending stiffness of Miscanthus × giganteus at an average modulus of 3.44 GPa was 1.1 N·m2 for the basal zone, 0.78 N·m2 for the central zone, and 0.72 N·m2 of the apical zone. For the average Young’s modulus of 0.19 GPa, the bending stiffness of the Rosa multiflora reached a value of 0.64 N·m2 for the basal zone, 0.23 N·m2 for the central zone, and 0.28 N·m2 for the apical zone. The Salix viminalis, with an average modulus of elasticity of 0.23 GPa, achieved bending stiffness in the basal zone of 0.99 N·m2, the central zone 0.33 N·m2, and the tip zone 0.38 N·m2. This research makes it possible to expand our knowledge in the field of biomass processing and construction of agricultural machinery with higher processing efficiency.

Evaluation and Analysis of the Energy Potential of Grapevine Peduncles of PIWI Group Varieties

Combustion and Energy Parameters of Grape Pomace/Skin Waste in Wine Production—Regent Variety Grafted onto Rootstocks

Technical Assessment of Bioenergy Recovery from Cotton Stalks Through Anaerobic Digestion Process and the Effects of Inexpensive Pre-Treatments

Analysis of the Energy Potential of Waste Biomass Generated from Fruit Tree Seedling Production

Analysis of the main physical and chemical characteristics of the vine shoots of three vine varieties from Veneto (Italy)

Evaluation of Growth and Energy Parameters of One-Year-Old Raspberry Shoots, Depending on the Variety

The Quality of Virginia Fanpetals Biomass as an Energy Source, Depending on the Type of Propagating Material and Plantation Age

Biorefinery approach for an integrated valorisation of grape pomace in distilleries

Drying of Prickly Pear (Opuntia ficus-indica (L.) Miller) and Its Potential as a Solid Biofuel

Qualitative analysis of pellets produced from Jerusalem artichoke (Helianthus tuberosus L.)

The Potential of Grape Pomace Varieties as a Dietary Source of Pectic Substances

Exploring the Potential of Perennial Nectar‐Producing Wild Plants for Pellet Combustion

Techno-economic Analysis of a Grape Pomace Biorefinery: Production of Seed Oil, Polyphenols, and Biochar

Bio-Waste from Urban and Rural Areas as a Source of Biogas and Methane—A Case Study from Poland

Assessment of Quality Indicators of Pressed Biofuel Produced from Coarse Herbaceous Plants and Determination of the Influence of Moisture on the Properties of Pellets

A technical-economic analysis of integrating vine prunings energy conversion systems for CHP production in local wineries

Biomass Pyrolytic Polygeneration System: Adaptability for Different Feedstocks

Potential Utilization of Unavoidable Food Supply Chain Wastes–Valorization of Pea Vine Wastes

Evaluation of the Phytochemistry and Biological Activity of Grape (Vitis vinifera L.) Stems: Toward a Sustainable Winery Industry

Determination of Strength Properties of Energy Plants on the Example of Miscanthus × Giganteus, Rosa Multiflora and Salix Viminalis

Evaluation of Organic Waste Long-Term Effects on Cellulose, Hemicellulose and Lignin Content in Energy Grass Species Grown in East-Central Poland