Abstract:The anaerobic digestion of the organic fraction of municipal solid waste and the biogas production obtained from its stabilization are becoming an increasingly attractive solution, due to their beneficial effects on the environment. In this way, the waste is considered a resource allowing a reduction in the quantity of it going to landfills and the derived greenhouse gas emissions. Simultaneously, the upgrading process of biogas into biomethane can address the issues dealing with decarbonization of the transport. In this work, the production of biogas obtained from the organic fraction of municipal solid wastes in a plug flow reactor is analyzed. In order to steer the chemical reactions, the temperature of the process must be kept under control. A new simulation model, implemented in the MatLab® environment, is developed to predict the temperature field within the reactor, in order to assess how the temperature affects the growth and the decay of the main microbial species. A thermal model, based on two equilibrium equations, is implemented to describe the heat transfer between the digester and the environment and between the digester and the internal heat exchanger. A biological model, based on suitable differential equations, is also included for the calculation of the biological processes occurring in the reactor. The proposed anaerobic digestion model is derived by the combination of these two models, and it is able to simultaneously simulate both thermal and biological processes occurring within the reactor. In addition to the thermal energy demand, the plant requires huge amounts of electricity due to the presence of a biogas upgrading process, converting biogas into biomethane. Therefore, the in-house developed model is integrated into a TRNSYS environment, to perform a yearly dynamic simulation of the reactor in combination with other renewable technologies. In the developed system layout, the thermal energy required to control the temperature of the reactor is matched by a solar thermal source. The electrical demand is met by the means of a photovoltaic field. In this work, a detailed thermoeconomic analysis is also proposed to compare the environmental impact and economic feasibility of a biomethane production plant based on a plug flow reactor and fed by renewables. Several economic incentives are considered and compared to determine the optimal solution, both in terms of energy and economic savings. The plant is designed for the treatment of a waste flow rate equal to 626.4 kg/h, and the biomethane produced, approximately 850 tons/years, is injected into the national gas grid or supplied to gas stations. In the proposed plant, a solar field of an evacuated tube collector having a surface of approximately 200 m2 is able to satisfy 35% of the thermal energy demand while over 50% of the electric demand is met with a photovoltaic field of 400 m2. A promising payback time of approximately 5 years was estimated.

A technical-economic analysis of integrating vine prunings energy conversion systems for CHP production in local wineries

Modeling and Experimental Study of a Small Scale Olive Pomace Gasifier for Cogeneration: Energy and Profitability Analysis

Thermoeconomic Analysis of a Small-Size Biomass Gasification Plant for Combined Heat and Distributed Power Generation

Analysis of the main physical and chemical characteristics of the vine shoots of three vine varieties from Veneto (Italy)

Conversion of Problematic Winery Waste into Valuable Substrate for Baker's Yeast Production and Solid Biofuel: A Circular Economy Approach§

Energy recovery and waste valorization in a frozen food processing facility: a case study from Lazio, Italy

Combustion and Energy Parameters of Grape Pomace/Skin Waste in Wine Production—Regent Variety Grafted onto Rootstocks

Bioenergy from anaerobic digestion plants: Energy and environmental assessment of a wide sample of Italian plants

Sustainability assessment of the whole biomass-to-energy chain of a combined heat and power plant based on biomass gasification: biomass supply chain management and life cycle assessment

Energetic, Exergetic, and Techno-Economic Analysis of A Bioenergy with Carbon Capture and Utilization Process via Integrated Torrefaction–CLC–Methanation

The Assessment of the Operational Performance of a Dry Anaerobic Reactor of Cambuci Husks to Bioenergy Potential and Biorefinery Integration

A Dynamic Analysis of Biomethane Reforming for a Solid Oxide Fuel Cell Operating in a Power-to-Heat System Integrated into a Renewable Energy Community

Heat Pumps, Wood Biomass and Fossil Fuel Solutions in the Renovation of Buildings: A Techno-Economic Analysis Applied to Piedmont Region (NW Italy)

Profitability analysis of thermochemical processes for biomass-waste valorization: a comparison of dry vs wet treatments

Agrisolar, incentives and sustainability: Profitability analysis of a photovoltaic system integrated with a storage system

A renewable energy scenario for a new low carbon settlement in northern Italy: Biomass district heating coupled with heat pump and solar photovoltaic system

Dynamic Simulation and Thermoeconomic Analysis of a Novel Hybrid Solar System for Biomethane Production by the Organic Fraction of Municipal Wastes

Energetic Comparison between Pneumatic and Traditional Disintegration in the Vinification of Negroamaro Grapes

Techno-economic Analysis of a Grape Pomace Biorefinery: Production of Seed Oil, Polyphenols, and Biochar

Techno-Economic Assessment of a Gasification Plant for Distributed Cogeneration in the Agrifood Sector

Techno-Economical Assessment for Combined Production of Hydrogen, Heat, and Power from Residual Lignocellulosic Agricultural Biomass in Huesca Province (Spain)