A Non-Linear Temperature Compensation Model for Improving the Measurement Accuracy of an Inductive Proximity Sensor and Its Application-Specific Integrated Circuit Implementation

Li Wang,Hui-Bin Tao,Hang Dong,Zhi-Biao Shao,Fei Wang
DOI: https://doi.org/10.3390/s20175010
IF: 3.9
2020-09-03
Sensors
Abstract:The non-linear characteristic of a non-contacting Inductive Proximity Sensor (IPS) with the temperature affects the computation accuracy when measuring the target distance in real time. The linear model based method for distance estimation shows a large deviation at a low temperature. Accordingly, this paper presents a non-linear measurement model, which computes the target distance accurately in real time within a wide temperature range from −55 °C to 125 °C. By revisiting the temperature effect on the IPS system, this paper considers the non-linear characteristic of the IPS measurement system due to the change of temperature. The proposed model adopts a non-linear polynomial algorithm rather than the simple linear Look-Up Table (LUT) method, which provides more accurate distance estimation compared to the previous work. The introduced model is fabricated in a 0.18 μm Complementary Metal Oxide Semiconductor (CMOS) process and packaged in a CQFN40. For the most commonly used sensing distance of 4 mm, the computed distance deviation of the Application-Specific Integrated Circuit (ASIC) chips falls within the range of [−0.2,0.2] mm. According to the test results of the ASIC chips, this non-linear temperature compensation model successfully achieves real-time and high-accuracy computation within a wide temperature range with low hardware resource consumption.
engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
What problem does this paper attempt to address?
The problem that this paper attempts to solve is: in a wide temperature range (-55°C to 125°C), the influence of nonlinear characteristics caused by temperature changes on the measurement accuracy of inductive proximity sensors (IPS). Traditional distance estimation methods based on linear models show large deviations at low temperatures and cannot accurately calculate the target distance in real - time. Specifically, several key issues mentioned in the paper include: 1. **Influence of temperature on resistance and inductance**: As the temperature changes, the resistances ( \( R \), \( R_x \) and \( R_{ON} \)) in the IPS system will change linearly, and these resistance changes will lead to nonlinear changes in the output voltage \( U_C(t) \), thus affecting the accuracy of distance estimation. 2. **Limitations of the traditional linear look - up table (LUT) method**: Under low - temperature conditions, using the linear LUT method for distance estimation will produce large deviations. For example, at - 55°C, the deviation can reach 8 LSB (this is shown in Figure 3b). Therefore, a new method is needed to improve the measurement accuracy under low - temperature conditions. 3. **Hardware resource limitations**: In order to achieve real - time high - precision measurement, hardware resource limitations must be considered. It is almost impossible to directly use complex nonlinear equations (such as Equation 4) for calculation in ASIC implementation. Therefore, the calculation method needs to be simplified to adapt to hardware resource limitations. To solve the above problems, the paper proposes a nonlinear temperature compensation model, which can calculate the target distance in real - time with high precision in a wide temperature range and has low hardware resource consumption. Specific measures include: - **Two - stage scheme**: In the offline stage, a large number of calculations are carried out to generate temperature characteristic parameters, reducing the amount of calculation in the online stage; in the online stage, these parameters are used for nonlinear piecewise fitting calculation. - **Nonlinear polynomial algorithm**: A nonlinear polynomial algorithm is used instead of the simple linear LUT method to improve the accuracy of distance estimation. - **Piecewise fitting scheme**: Piecewise fitting is carried out according to different temperature ranges to better reflect the nonlinear characteristics of the IPS measurement system. - **Voltage pool generation**: In the online stage, a voltage pool is generated through nonlinear piecewise calculation to further improve the calculation accuracy and reduce unnecessary calculations. Through these improvements, the paper has successfully achieved real - time high - precision target distance estimation in a wide temperature range.