Abstract:Polymer coatings have been widely used in the automobile industry for the corrosion protection of metallic materials. However, the failures of the polymer materials are caused by the extensive exposure of the coated steel to the aggressive electrolytes. To enhance the protective performance of the polymer coatings, functionalized nanoparticles are added to the polymers. The 2-aminothiazole (AT) modified TiO2–ZrO2 nanoparticles examined by Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy/energy-dispersive X-ray analysis (SEM/EDX), transmission electron microscopy (TEM), and X-ray diffractometry (XRD) were added to polyurethane (PU). The synthesized PU–AT/TiO2–ZrO2-coated specimen was studied by scanning electrochemical microscopy (SECM), potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) for their anti-corrosion and mechanical behaviours. EIS studies revealed excellent protection behaviour for the PU–AT/TiO2–ZrO2-coated steel in natural seawater. The coating resistance of the PU–AT/TiO2–ZrO2 nanocomposite was found to be 1970.17 kΩ.cm2, whereas lower coating resistance was observed for the pure polyurethane-coated steel (62.17 kΩ.cm2. It is found that the coating resistance of PU–AT/TiO2–ZrO2 nanocomposite is over 48% higher than that of the PU coating. The measured current by SECM investigation over the PU–AT/TiO2–ZrO2 nanocomposite coating was very low (1.4 nA) in comparison with the PU coating (6.1 nA). The surface morphological studies of the coated steel by SEM/EDX analysis and X-ray diffraction (XRD) analysis revealed that the TiO2–ZrO2 nanoparticles were enriched at the corrosion products which prevented corrosion initiation processes. The enhanced dynamic mechanical properties were noticed for PU–AT/TiO2–ZrO2 coating when the concentration of nanoparticles was 3 wt%. However, there was a decrease in their mechanical properties beyond 3 wt% because of the aggregation of nano-TiO2–ZrO2 particles in the PU matrix. The resulting PU–AT/TiO2–ZrO2 formulation exhibits an excellent hydrophobic behaviour (WCA: 116.9º). Therefore, it was concluded from the investigations that the newly synthesized PU–AT/TiO2–ZrO2 nanocomposite provided excellent barrier, mechanical, and hydrophobic properties due to the addition of AT/TiO2–ZrO2 nanoparticles to the polyurethane which prevented the degradation of materials and helped to prolong the life of the coated steel.

Surface, Chemical, and Mechanical Properties of Polyurethane-Coated Galvanized Steel Sheets

Design, synthesis, and evaluation of high‐performing anticorrosive polyurethane coatings with inbuilt redoxable oligomeric aniline segments

Enhanced hydrophobicity of polyurethane coating for steel protection through replication and nanomaterial integration

Wear, Corrosion and Tribocorrosion Behavior of Polyurethane and Polyvinylpyrrolidone Blends as Coating for Corrosion Protection of AISI 316L Stainless Steel

Electrochemical and dynamic mechanical properties of polyurethane nanocomposite reinforced with functionalized TiO2–ZrO2 nanoparticles in automobile industry

Preparation and Characterization of Solvent-Free Anti-Corrosion Polyurethane-Urea Coatings

Preparation and properties of polyurethane cold galvanizing coatings with phosphoric acid modified zinc powder

Preparation and Properties of Corrosion-Resistant Coatings from Waterborne Polyurethane Modified Epoxy Emulsion

Studies on nano-hybrid biopolymer composite coating on corroded steel to improve the corrosion resistance and hydrophobicity of the surface

Electroactive Polyurea Bearing Oligoaniline Pendants: Electrochromic and Anticorrosive Properties

Fabrications of hybrid Polyurethane-Pd doped ZrO2 smart carriers for self-healing high corrosion protective coatings

Surface modified molybdenum disulfide nanosheets for corrosion resistance improvement on polyurethane coatings

Relationship Between Degree of Microphase Separation, Crosslinking Density, and Anticorrosive Performance of Casting Polyurethane Coatings

Research on the impact performance of polyurethane coating on the steel structure surface

Long-lasting anti-corrosion direct-to-metal polyurethane NP-GLIDE coatings based on the coordination effect and dual cross-linking of polyphenol

High performance polyurethane nanocomposite coatings based on 2D materials for improved anticorrosion and flame-retardant applications

Polymeric Protective Films as Anticorrosive Coatings-Environmental Evaluation

Comprehensive study on the electrochemical, morphological, and adhesion properties of Cr-free thin film: with and without polyurethane coating

Tribological and Anticorrosion Behavior of Coating Systems Based on Polyurethane and Organic Silicon Compounds

Mechanical, adhesion and corrosive properties of unsaturated polyester-graphene coating treated with silane coupling agent on metal substrate

Polyurethane Nanocomposite Coatings Coupled with Titanium-Based Conversion Layers for Enhanced Anticorrosion, Icephobic Properties, and Surface Protection