Abstract:Titanium and its alloys have superior electrochemical properties compared to other alloy systems due to the formation of a protective TiO2 film on metal surfaces. The ability to generate the protective oxide layer will depend upon the type of alloy to be used. The aim of this work was to characterize the electrochemical corrosion behavior of titanium Ti-CP2 and alloys Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-4V, and Ti Beta-C. Samples were anodized in 1 M H2SO4 and H3PO4 solutions with a current density of 0.025 A/cm2. Electrochemical tests on anodized alloys were carried out using a three-electrode cell and exposed in two electrolytes, i.e., 3.5 wt % NaCl and 3.5 wt % H2SO4 solutions at room temperature. Scanning electron microscopy (SEM) was used to observe the morphology of anodized surfaces. The electrochemical techniques used were cyclic potentiodynamic polarization (CPP) and electrochemical noise (EN), based on the ASTM-G61 and G199 standards. Regarding EN, two methods of data analysis were used: the frequency domain (power spectral density, PSD) and time-frequency domain (discrete wavelet transform). For non-anodized alloys, the results by CCP and EN indicate icorr values of ×10−6 A/cm2. However, under anodizing conditions, the icorr values vary from ×10−7 to ×10−9 A/cm2. The PSD Ψ0 values are higher for non-anodized alloys, while in anodized conditions, the values range from −138/−122 dBi (A2·Hz−1)1/2 to −131/−180 dBi (A2·Hz−1)1/2. Furthermore, the results indicated that the alloys anodized in the H3PO4 bath showed an electrochemical behavior that can be associated with a more homogeneous passive layer when exposed to the 3.5 wt % NaCl electrolyte. Alloys containing more beta-phase stabilizers formed a less homogeneous anodized layer. These alloys are widely used in aeronautical applications; thus, it is essential that these alloys have excellent corrosion performance in chloride and acid rain environments.

Comprehensive study on the electrochemical, morphological, and adhesion properties of Cr-free thin film: with and without polyurethane coating

Polyurethane Nanocomposite Coatings Coupled with Titanium-Based Conversion Layers for Enhanced Anticorrosion, Icephobic Properties, and Surface Protection

Investigating the influence of pore-widening time control in electrochemical anodization for the formation of hybrid titanium nanostructures with enhanced superhydrophobicity for improved corrosion resistance efficiency

Study the Effect of Surface Parameters Variation on the Corrosion Behavior of Thin Chromium Layer on Modified Titanium

Anti-Corrosion Property of Atomic Layer Deposition Films for Anodized Aluminum

Effects of incorporation of silanized titanium nitride on the electrochemical and mechanical properties of polyurethane in aircraft coating

Preparation and corrosion resistance of titanium–zirconium–cerium based conversion coating on 6061 aluminum alloy

Surface Hydrophilicity and Antifungal Properties of Tio2 Films Coated on A Co-Cr Substrate

The effect of substrate surface integrity on the surface properties of TiCrN coating applied via the CAE‐PVD method

Electrochemical properties and surface conductivity of Ti-Al coating on Ti-6Al-4V

Electro-Assisted Preparation of Dodecyltrimethoxysilane/Tio2 Composite Films for Corrosion Protection of Aa2024-T3 (aluminum Alloy)

Role of coating techniques and low surface energy materials on long-term performance of superhydrophobic titanium

Preparation of Ti–Zr-Based Conversion Coating on 5052 Aluminum Alloy, and Its Corrosion Resistance and Antifouling Performance

Nano-TiO2 Coating Layers with Improved Anticorrosive Properties by Aerosol Flame Synthesis and Thermophoretic Deposition on Aluminium Surfaces

Corrosion characteristics of Ti and Al2O3/Ti thin films sputtered on 316LSS

Effect of Alkaline Etching on Formation Behavior and Corrosion Resistance of a Cr-Zr-Ti TCP Conversion Coating on AA2024 Aluminum Alloy

Efficient one-step fabrication of superhydrophobic nano-TiO2/TMPSi ceramic composite coating with enhanced corrosion resistance on 316L

Improving environmental protection of waterborne polyurethane coating by adding TiO2/polyaniline/HNT/CNT nanocomposite

The effect of surfactant-free TiO2 surface hydroxyl groups on physicochemical, optical and self-cleaning properties of developed coatings on polycarbonate

Effect of Low-Friction Composite Polymer Coatings Fabricated by Electrophoretic Deposition and Heat Treatment on the Ti-6Al-4V Titanium Alloy’s Tribological Properties

Electrochemical Corrosion of Titanium and Titanium Alloys Anodized in H2SO4 and H3PO4 Solutions