Abstract:A series of hydrocarbon-air fuel venting explosion experiments were carried out in a 20-L small-scale vent tank, and the effect of four different vent covers with an inherent rupture pressure of 10 kPa on the overpressures and flame propagation characteristics was studied. The results of the experiments showed that all the internal and external overpressure-time profiles have five typical overpressure peaks, induced by burst of the vent cover (△p1), inertia effect (△pneg), burned gas releasing (△p2), external explosion (△p3) and Helmholtz oscillation (△phel), respectively. The dynamic process of the flame was basically tally with the rule of ‘smooth and hemispherical flame-twisted and stretched flame-mushroom cloud-like/ellipsoidal flame-extinguishing flame’, but some differences were still existed due to the specific damage mode of each vent cover. When the vent opening was sealed by different vent covers, the values of internal and external overpressure peaks, maximum rate of overpressure rises, flame front location along different directions, and flame front speed along different directions showed various trends. Specifically, the enhancement effect of the metal cover plate and PE vent cover was significantly weaker than that of the paper vent cover and Al vent cover for the overpressure and vertical flame parameters, while, the enhancement effect of the metal cover plate was found to be greater than the other three for the horizontal flame parameters. Consequently, PE cover had the optimum performance for the explosion venting under the same inherent rupture pressures. These results improve our understanding on gas explosion dynamics in a semi-confined space with a vent cover, and provides the overpressure and flame characteristics of gas venting explosion under different vent boundary conditions from the qualitative and quantitative view.

Effect Analysis of the Venting Direction on Explosion Pressure in LPG Pipelines

Numerical Investigation on Explosion of Quick Actuating Pressure Vessels Due to Residual Pressure

Risk Assessment of Liquefied Petroleum Gas Explosion in a Limited Space

Study on Explosion Venting Characteristics of L-Type Venting Duct

Experimental study on characteristics of flame propagation and pressure development evolution during methane-air explosion in different pipeline structures

Gas Explosion Venting of Premixed Gases in Linked Vessels

Experimental and Numerical Evaluations on Characteristics of Vented Methane Explosion

Study on Premixed Flammable Gas Explosion Venting in Linked Vessels

Experimental Study on Premixed Flammable Gas Explosion Venting in Linked Vessels under the Same Effictive Vent Area

Experimental Research On Gas Explosion Venting Of Premixed Gases In Linked Vessels

Experimental Investigation And Numerical Simulation Of Gas Explosion In Linked Vessels

Effect of different vent covers on the overpressure and flame propagation characteristics of hydrocarbon fuel-air mixture venting explosion

Influence of vent size and vent burst pressure on vented ethylene-air explosion: Experimental and numerical study

Study on Ground Vibration Mode of Physical Explosion of High Pressure Natural Gas Pipeline

Experimental study on the flame-dual field overpressure coupling evolution characteristics of LPG/DME blended gas explosion venting

Consequences analysis of the LPG tank truck traffic accident: A case study of the Wenling explosion accident

Experimental analysis of explosion in spherical vessel vented into dump vessel

Effects of vent layout and vent area on dynamic characteristics of premixed methane-air explosion in a tube with two side-vented ducts

A numerical study of gas explosion with progressive venting in a utility tunnel

Numerical simulation of influence factors during venting process in spherical vessel

Experimental Research on Rapid Fire Zone Sealing and Explosion Venting Characteristics of an Explosion Venting Door Using a Large-Diameter Explosion Pipeline