Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Performance improvement of poly(butylene adipate-butylene terephthalate) based nanocomposites modified by the cooperation of nano montmorillonite and ionic liquid

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Effect of molding on the structure and properties of poly(butylene adipate-co-terephthalate)/poly(propylene carbonate)/organically modified montmorillonite nanocomposites

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

STUDIES ON PREPARATION OF POLYBUTADIENE/MONTMORILLONITE NANOCOMPOSITES BY ANIONIC POLYMERIZATION AND THEIR STRUCTURE AND PROPERTIES

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Poly(butylene terephthalate)/Clay Nanocomposites directly Prepared from Pristine Montmorillonite (MMT)

Effect of Montmorillonite on Morphology, Rheology, and Properties of a Poly[styrene–(ethylene-Co-butylene)–styrene]/poly(ɛ-caprolactone) Nanocomposite

Study on Structure and Properties of Biodegradable PLA/PBAT/organic-modified MMT Nanocomposites

A New Method Combining Modification of Montmorillonite and Crystal Regulation to Enhance the Mechanical Properties of Polypropylene

Preparation and characterization of poly(butylene terephthalate) nanocomposites from thermally stable organic-modified montmorillonite

Synthesis of Poly (hexamethylene Terephthalamide)-Co-polycaprolactam/modified Montmorillonite Nanocomposites with Enhanced Mechanical Properties and Lower Water Absorption Rate by In-Situ Polymerization

Multifunctional Role of an Ionic Liquid in Melt-Blended Poly(Methyl Methacrylate)/Multi-Walled Carbon Nanotube Nanocomposites

Properties of Poly(Lactic Acid)/Poly(Butylene Adipate-Co-Terephthalate)/Nanoparticle Ternary Composites

Effect of compound organification of montmorillonite on the structure and properties of polypropylene/montmorillonite nanocomposites

Study of Thermal, Mechanical and Barrier Properties of Biodegradable PLA/PBAT Films with Highly Oriented MMT

Mechanical Properties Improvement of Montmorillonite‐filled Isotactic Polypropylene Nanocomposites by Β‐modification

Preparation and foaming extrusion behavior of polylactide acid/polybutylene succinate/montmorillonoid nanocomposite

The influence of multiple modified MMT on the thermal and fire behavior of poly (lactic acid) nanocomposites

Studies on morphologies and thermal properties of poly(lactic acid)/polycaprolactone/organic-modified montmorillonite nanocomposites