Abstract:This paper presents a novel two-dimensional maglev servo proportional cartridge valve (2D maglev valve), where a contactless maglev coupling is introduced between electro-mechanical converter and valve body to realize functions of force transmission, spool position feedback and linear-rotary motion conversion. Such configuration can effectively reduce cost of both valve manufacturing and electro-mechanical converter, while still maintain features of 2D valve such as null pilot leakage, high power-to- weight ratio and excellent anti-pollution capacity. Firstly, the characteristic equation of the valve is derived using linear theory, and the stability criterion is established for parameter determination. The influences of crucial structural parameters such as initial height of overlapping area, width of high-pressure and low-pressure holes, acting radius of magnetic force, pitch angle of maglev coupling, length of sensitive chamber and system pressure on the dynamic response are investigated based on AMESim numerical simulation. The prototype valve is then designed and manufactured and a special test rig is built. The no-load flow characteristic, load flow characteristic, leakage characteristic, amplitude and phase frequency characteristics and step response under different system pressures are measured. The experimental results are in a good agreement with the simulated analysis. As an over-damped system, the prototype valve has excellent working stability, which can reach a no-load flow rate of 105.9 L/min with hysteresis of 3.51%, amplitude bandwidth of 28.7 Hz and phase bandwidth of 42.8 Hz under 21 MPa. The research indicates that the 2D maglev valve can be a potential solution of flow rate control valve for flight control surface system of civil aircraft with high pressure and large flow rate application.

A high resolution and wide range valve for micronewton cold gas thrusters

Research and Fabrication of a Low-Cost Valveless Micropump Based on Piezoelectric Actuation

Design and Characteristics Analysis of a High Precision Pneumatic Proportional Pressure Valve

Design and modeling of precise flux valve driven by piezoelectric ceramics

Design and Simulation of a High Pressure Proportional Pneumatic Pressure Reducing Valve

Design and Simulation of Pneumatic Proportional Extra-High Pressure Valve

Hydraulic-feedback Proportional Valve Design for Construction Machinery

Modeling and characteristics investigation on a new pneumatic proportional pressure valve

Development of a novel high pressure electronic pneumatic pressure reducing valve

Energy-saving, High-Pressure Resistant Mini Valve Based on a Bistable Electromagnetic Actuator

Direct Simulation Monte Carlo Simulation of the Effect of Needle Valve Structures on the Rarefied Flow of Cold Gas Thrusters

Piezoelectric Actuator and Its Application in Hydraulic Valves

Theoretical and experimental investigation on novel 2D maglev servo proportional valve

Modeling and simulation analysis of a novel proportional water flow valve with a digital pilot stage

Performance analysis of a high-frequency two-stage proportional valve piloted by two high-speed on/off valve arrays

Study of Proportion and Fuzzy Control Method Upon Precision Micro-Flow Valve

Kinetic Simulation of Nozzle Flow in a Micronewton-Class Cold Gas Thruster

Mechanism and Validation of a Long-Stroke Ultraprecision Atmospheric Pressure Driven Actuator

Study on the control of propellant flow by electric field in ionic liquid electrospray thruster

Flow Regulation Performance Analysis of Microfluidic Passive Valve for High Throughput Liquid Delivery

Precision Feedback Control Design of Miniature Microwave Discharge Ion Thruster for Space Gravitational Wave Detection