Abstract:High-voltage (HV) wide bandgap (WBG) silicon carbide (SiC) power modules, capable of higher switching frequencies and thermal stresses than their silicon-based counterparts, are well suited for the next generation of highly-efficient power converters for medium-voltage (MV) grid applications. HV SiC power modules allow for simpler two-level HV converter topologies reducing control and system-level complexity while increasing power density, efficiency, and reliability. Furthermore, modular designs are also possible for multi-level converters at 15 kV-class distribution voltages and beyond. Both 10-kV and 6.5-kV SiC MOSFETs are leading candidates for developing multiple MV grid applications. This paper presents the design and test of a two-level DC-DC solid-state transformer (SST) based on 3rd-generation 10-kV SiC power modules as a building block for MV power conversion. The converter configuration is based on a three-phase dual active bridge (TPDAB). An integrated leakage methodology is used to meet the series inductance requirements for maximum power transfer and optimize the transformer volume. Due to the transformer stray capacitances and high dv/dt of the SiC MOSFETs, high-frequency oscillations (HFO) become a significant challenge to avoid unwanted voltage spikes, current resonances, and losses. The HFO amplitudes can be minimized by considering transformer winding arrangements with lower stray capacitances leading to higher oscillation frequencies. Hence, design considerations and boundaries for the power converter and the high-frequency (HF) transformer are derived and presented. Experiments on a 150-kW TPDAB are conducted to validate the proposed design, yielding efficiencies above 98 % at 20 kW, 40 kW and 100 kW power levels, and demonstrate significant mitigation of HFO issues.

Medium Voltage Converter Inductor Insulation Design Considering Grid Requirements

Real Field Mission Profile Oriented Design of a SiC-based PV-inverter Application

A 380 V/50 Kvar SiC-SVG Achieving a Power Density of 1.652 Kvar/l with the Optimization of Heatsink and Output Filter Volume

A High Frequency High Efficiency GaN Based Bi-Directional 48V/12V Converter with PCB Coupled Inductor for Mild Hybrid Vehicle

A Three-Phase Isolated Building Block for High-Power Medium-Voltage Grid Applications

Design of Low Inductance SiC-MOS/Si-IGBT Hybrid Module for PV Inverters

A Three-Phase-Module-Parallel Si & SiC Hybrid Inverter with Smaller Filter Size and Low Cost

Design And Demonstration Of A Sic-Based 800-V/10-Kv 1-Mw Solid-State Transformer For Grid-Connected Photovoltaic Systems

Medium-Voltage Isolated Auxiliary Power Supply Design for High Insulation Capability, Ultra-Low Coupling Capacitance, and Small Size

Efficiency Improvement of Grid Inverters With Hybrid Devices

Study and Design of Grid Connected Inverter for 2 MW Wind Turbine

Sic Mosfet Zero-Voltage-Switching Svm Controlled Three-Phase Grid Inverter

Comprehensive and Robust Parameter Design of Grid-Forming Converter with Inner Dual-Loop under Weak Grid Condition

Design and Optimization of a 200-Kw Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters

Design of a High-Voltage-Insulation and High-Efficiency Medium Frequency Transformer

A Design Investigation of A 1 MVA SiC MOSFET Medium Voltage Variable Frequency Drive with Various Filtering Options

Design of Medium-Voltage High-Frequency Transformers Based on High-Thermal-Conductivity Insulation Material

Design Considerations for High-Voltage Insulated Gate Drive Power Supply for 10-kV SiC MOSFET Applied in Medium-Voltage Converter

Design of a 10 kV SiC MOSFET-based high-density, high-efficiency, modular medium-voltage power converter

15 Kv SiC MOSFET: an Enabling Technology for Medium Voltage Solid State Transformers

Insulation Design of Gas Insulated HVDC Transmission Line