Abstract:This work aims to elucidate the interaction between hydrogen atoms and pre-introduced dislocations in commercially pure titanium (CP-Ti). Positron annihilation spectroscopy supplemented by the first-principle calculations was utilized to reveal the effects of dislocation densities on the formation of hydride types and the concentration of hydrogen-induced defects in CP-Ti. Results show that, in the hydrogen-charged sample with 40 % deformation, hydrogen-induced damage gradually decreases when the hydrogen enters the sample at a depth of about 350 nm. This finding suggests that the high-density dislocations present in deformed specimens effectively trap hydrogen atoms and inhibit their diffusion, which ultimately mitigate damage within the samples. γ-TiH and δ-TiH 2 hydrides are observed in the hydrogen-charged sample. The thermal desorption spectroscopy results show that the desorption amount of deuterium decreases from 1.14 × 10 18 D/cm 2 to 5.10 × 10 17 D/cm 2 with an increase in dislocation density because dislocations inhibit the diffusion of deuterium. In samples with higher deformation, the high dislocation density inhibits the formation of δ-TiH 2 hydrides and promotes the formation of γ-TiH hydrides, which significantly reduce the hardening of samples. These results provide insight into the interaction of hydrogen with pre-introduced defects and provide strong theoretical support for the development and improvement of more damage-resistant materials.

First-principles analysis of the stability and hydrogen adsorption properties of the α-Ti/α 2 -Ti 3 Al interface towards clarified hydrogen embrittlement mechanism of titanium alloys

Hydrogen-surface interaction from first-principles calculations and its implication to hydrogen embrittlement mechanisms of titanium

Improving the Mechanical Processing of Titanium by Hydrogen Doping: A First-Principles Study

First Principles Study on Stability and Hydrogen Adsorption Properties of Mg/Ti Interface

First‐Principle Calculation of the Hydrogen Adsorption and Diffusion Characteristics at an Ni3Al/Ni Interface

Mechanism for Adsorption, Dissociation, and Diffusion of Hydrogen in High-Entropy Alloy AlCrTiNiV: First-Principles Calculation

Deciphering Hydrogen Embrittlement Mechanisms in Ti6Al4V Alloy: Role of Solute Hydrogen and Hydride Phase

Investigation on the Microstructures and Hydrogen Embrittlement Mechanism of Hydrogenated Ti6al4v

Role of intracrystalline hydrogen on the ductility of dilute Ti-based alloys by first-principles calculations

Tensile Properties and Fracture Mechanism of the Ti2AlC(0001)/TiAl(111) Interface: Insights from a First-Principles Study

First-principles Calculations of Ti3SiC2 and Ti3AlC2 with Hydrogen Interstitial

The Elemental Effects on the H2 Dissociative Adsorption on FeCrAl (110) Surface

Formation of Titanium Hydride in Ti–6Al–4V Alloy

Studies of hydrogen storage properties and absorption-desorption mechanism of FeTi1.3(Mm)y alloy

Understanding hydrogen diffusion mechanisms in doped α-Fe through DFT calculations

Effect of pre-deformation on hydrogen diffusion and hydrogen induced damage in commercially pure titanium

Insights into hydrogen-induced strengthening mechanism of TiC/Ti6Al4V via experiments and first-principles calculations

First-Principles Study on A Potential Hydrogen Storage Medium of Mg/Tial Sandwiched Films

Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale

Effects of Hydrogen on the Mechanical Properties of Ti–Al–Zr Alloy

Effect of Β-Phase Stabilizing Elements and High Temperature (1373–1693 K) on Hydrogen Absorption in TiAl Alloys