Abstract:To eliminate the shortcomings in the grouting sleeve and other connection forms in precast concrete shear wall structure induced by the poor grouting, difficult quality assurance, low construction efficiency, and high cost, a new type of monolithic assembled concrete shear wall structure with non-connected vertical distributed reinforcement was proposed in this paper. The new shear wall structure is composed of middle precast wall panels and cast-in-place boundary members. The vertical distributed reinforcement in the middle precast wall panels is not connected between the upper and lower floors. This technique was based on the normal section bearing capacity of equal strength and inclined section bearing capacity of equal strength compared with the cast-in-place shear wall structure. Three full-scale models of precast shear walls and one cast-in-place contrast specimen were tested for their seismic performance under pseudo-static loading. All precast specimens are cast based on the manufacture specification of the factory. By analysis of test results, including the failure modes, load-lateral drift hysteresis curves, bearing capacity, hysteretic characteristics, deformation components, ductility, rigidity degeneration, energy dissipation, and strain distribution, all the specimens were obtained and compared. Comparisons between test results indicate that the proposed shear walls have a similar bearing capacity as that of the cast-in-place shear wall and improved energy dissipation and ductility. Moreover, the specimen with inclined reinforcement performs better in drift capacity compared to companion specimens. The contribution of flexural deformation to the total displacement of each specimen is the largest, follow by the contribution of shear deformation, and the contribution of slip is the smallest. The strain of non-connected vertical distributed reinforcement of the precast panel did not yield during the loading process. The cross-section of the precast shear wall panel conforms to the assumption of plane cross-section according to the strain distribution before the reinforcement yields.

Seismic performance of precast concrete shear walls with spiral stirrup restrained grout-anchored lapped reinforcement connection

Seismic performance of a new type of precast shear walls with non-connected vertical distributed reinforcement

Seismic performance of precast short-leg shear wall using a grouting sleeve connection

Cyclic performance of precast concrete shear walls with a mortar–sleeve connection for longitudinal steel bars

Experimental investigation of seismic performance of precast concrete shear walls with overlapping U-bar loop connections

Tests on seismic behavior of precast shear walls with cast-in-situ boundary elements and vertical distributed reinforcements spliced by a single row of steel bars

Seismic Performance of Precast Short-Limb Shear Wall with the Bundled Connection at Different Axial Compression Ratios

Tests on seismic behavior of pre-cast shear walls with vertical reinforcements grouted in holes and spliced indirectly

Study on Seismic Performance of Precast Shear Wall Structure Connected by Sleeve and Threaded Rod Connectors

Tests on seismic behavior of pre-cast shear walls with vertical reinforcements spliced by grout sleeves

Seismic performance of a novel partly precast RC shear wall with double precast edge members and a central T-shape CIP member

Seismic performance of innovative prefabricated reinforced recycled concrete shear walls

Tests on seismic behavior of pre-cast shear walls with various methods of vertical reinforcement splicing

Seismic Behaviors of Prefabricated Reinforced Concrete Shear Walls Assembled with a Cast-in-Place Vertical Joint

An experimental study of the seismic behaviour of precast concrete shear walls with bolted-plate connections

Experimental study of the hysteretic behavior of prefabricated frame-shear wall structures with grouting sleeve connections

Quasi-static Test and Simplified Analysis Method of a New Type Precast Shear Wall with Unconnected Vertical Distributed Reinforcements

Seismic Behaviour of PC-encased HCSC Composite Shear Walls under Vertical Tension and Horizontal Cyclic Loading

Mechanical Behavior of Precast Building Concrete Walls with Different Connection Technologies for Seismic Areas

Experimental study on seismic performance of T‐shaped partly precast reinforced concrete shear wall with grouting sleeves

Seismic performance and parametric study of precast reinforced concrete Shear Wall structure with indirect‐lapping joints