Abstract:Lead-free flexible piezoelectric and triboelectric nanogenerators are sought after due to their ability to produce electricity by harnessing wasteful mechanical energy. A comprehensive understanding of additives and processing techniques is crucial for fine-tuning the performance of such energy systems. We have investigated in detail the effect of the addition of reverse microemulsion synthesized barium tungstate nanorods (BWN) on morphology, crystallinity, polymorphism of electrospun nanofabrics of poly(vinylidene fluoride) (PVDF). The electroactive phase content of the nanofabrics was enhanced upon the addition of BWN and the highest electroactive phase content of 86.5% was observed in the nanofabric containing 3 wt% of BWN. The dielectric constant of the nanofabric containing 5 wt% BWN was ~1.96 times higher than that of pristine PVDF nanofabric (EPVDF). The ratio of relative change in the capacitance to initial capacitance of the sensor fabricated from the same system was ~4 times greater than that of EPVDF. Consequently, its piezoelectric and triboelectric performances were improved. The piezoelectric nanogenerator fabricated using the nanofabric containing 3 wt% BWN produced the highest open-circuit voltage of 8 V under an applied load of 8 N. A triboelectric nanogenerator made using the same system was able to produce a voltage output of 200 V, which was 1.77 times as high as that of EPVDF under one-finger tapping in contact-separation mode. The same composite nanofabric produced piezoelectric and triboelectric power densities of 4.3 μW/cm2 and 646 μW/cm2, respectively. The triboelectric nanogenerator was able to light forty LEDs under one finger tapping. Fluttering-driven triboelectric nanogenerator fabricated using the aforementioned nanofabric was able to produce a triboelectric voltage of 84 V at a wind speed of 7 m/s. Overall, these nanofabrics could be a potential material for energy harvesting devices for powering wearable devices, environmental sensors, and internet of things.

CsPbI 3 -PVDF Composite-Based Multimode Hybrid Piezo-Triboelectric Nanogenerator: Self-Powered Moisture Monitoring System

Hybrid Piezoelectric/Triboelectric Wearable Nanogenerator Based on Stretchable PVDF-PDMS Composite Films

Piezoelectric Nanogenerator Based on Lead-Free Flexible PVDF-Barium Titanate Composite Films for Driving Low Power Electronics

Development of flexible PVDF/ BaTiO3-MoS2 polymer nanocomposites for energy harvesting and gas sensing applications

Development of a flexible piezoelectric and triboelectric energy harvester with piezo capacitive sensing ability from barium tungstate nanorod-dispersed PVDF nanofabrics

Flexible piezoelectric energy-harvesting nanogenerator using supersonically sprayed polyvinylidene fluoride and iron oxide nanocubes

Charge-defect tuned PVDF based ternary biocompatible composite as skin touch actuated single electrode triboelectric nanogenerator for wireless healthcare monitoring

A hybrid piezoelectric and triboelectric nanogenerator with lead-free BZT–BCT/PDMS composite and PVA film for scavenging mechanical energy

Polyvinylidene Fluoride/Aromatic Hyperbranched Polyester of Third-Generation-Based Electrospun Nanofiber as a Self-Powered Triboelectric Nanogenerator for Wearable Energy Harvesting and Health Monitoring Applications

Quenched PVDF/PMMA Porous Matrix for Triboelectric Energy Harvesting and Sensing

A high-performance flexible triboelectric nanogenerator based on cellulose acetate nanofibers and micropatterned PDMS films as mechanical energy harvester and self-powered vibrational sensor

Tribo-piezoelectric Synergistic BaTiO 3 /PDMS Micropyramidal Structure for High-performance Energy Harvester and High-sensitivity Tactile Sensing

Ultrarobust, hierarchically anisotropic structured piezoelectric nanogenerators for self-powered sensing

Electrospinning of Flexible Poly(vinyl alcohol)/MXene Nanofiber-Based Humidity Sensor Self-Powered by Monolayer Molybdenum Diselenide Piezoelectric Nanogenerator

PVDF Nanocomposites as Piezoelectric Nanogenerator: Properties, Fabrication and Market Applications

Development of a Sustainable and Biodegradable Sonchus asper Cotton Pappus Based Piezoelectric Nanogenerator for Instrument Vibration and Human Body Motion Sensing with Mechanical Energy Harvesting Applications

Piezoelectric nanogenerators from sustainable biowaste source: Power harvesting and respiratory monitoring with electrospun crab shell powder-poly(vinylidene fluoride) composite nanofibers

Stretchable Unsymmetrical Piezoelectric BiO2‐x Deposited‐Hydrogel as Multimodal Triboelectric Nanogenerators for Biomechanical Motion Harvesting

Electrospun PVDF-MoSe 2 nanofibers based hybrid triboelectric nanogenerator for self-powered water splitting system

Dynamic Pluronic F127 Crosslinking Enhancement of Biopolymeric Nanocomposites for Piezo-Triboelectric Single-Hybrid Nanogenerators and Self-Powered Sensors

Modulating Contact Electrification With Metal‐Organic Frameworks in Flexible Triboelectric Nanogenerators for Kinetic Energy Harvesting and Self‐Powered Humidity Sensing Applications