Abstract:The development of a flexible wearable piezoelectric power device has recently caught extensive attention, especially in making inorganic piezoelectric ceramics into polymers from a composite with excellent piezoelectric response. As inorganic piezoelectric fillers, an oriented polycrystal can improve the mechanical energy efficiency of piezoelectric nanogenerators. Herein, the two-dimensional BaTiO3-oriented polycrystals are prepared via a two-step hydrothermal process based on a topochemical conversion mechanism. Additionally, a high-performance piezoelectric nanogenerator was successfully fabricated using the polydimethylsiloxane (PDMS) polymer and BaTiO3-oriented polycrystals. The flexible piezoelectric nanogenerator with 30 wt % BaTiO3 exhibited optimal piezoelectric performance, with an output open-circuit voltage of 13.0 V and a short-circuit current of 200 nA under a periodic mechanical bend–release mode. More importantly, an effective power of approximately 2.6 μW was achieved at a low load resistance of 35 MΩ, suggesting a large potential for applications of electronic skins and self-powered devices. The device efficiently harvests biomechanical energy from human activities and exhibits stable output voltage and current of approximately 8 V and 150 nA, respectfully, demonstrating great promise as a wearable energy harvester. This work demonstrates that oriented nanocrystals in combination with a polymer matrix can lead to the design of high-efficiency piezoelectric nanogenerators that are particularly useful in artificial intelligence, soft robotics, and biomedical devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c07875.XRD and FE-SEM of the KTLO and HTO crystals. Raman spectra of composite films. SEM-EDS mapping images of composite film. Piezoelectric coefficients (d33) of the composite films. P–E hysteresis loop for the BT ceramics and PDMS film. Output performance of the PENG devices with different BT weight fractions. Schematic diagram of the test circuit. Calculated results of the stress distribution. (PDF)This article has not yet been cited by other publications.

A hybrid piezoelectric and triboelectric nanogenerator with lead-free BZT–BCT/PDMS composite and PVA film for scavenging mechanical energy

Piezo-Tribo-Electric Nanogenerator based on BCZT/MCNTs/PDMS Piezoelectric Composite for Compressive Energy Harvesting

Hybrid Piezoelectric/Triboelectric Wearable Nanogenerator Based on Stretchable PVDF-PDMS Composite Films

Enhanced-Performance Triboelectric Nanogenerator Based on Polydimethylsiloxane/Barium Titanate/Graphene Quantum Dot Nanocomposites for Energy Harvesting

A hybrid microwave sintered PZT composite as a flexible piezoelectric nanogenerator

Hybrid piezoelectric nanogenerator based on PVDF film and vertically aligned ZnO nanorods for energy harvesting applications

An enhanced nano-energy harvesting device by hybrid piezoelectric/triboelectric composites

Piezoelectric Nanogenerator Based on Lead-Free Flexible PVDF-Barium Titanate Composite Films for Driving Low Power Electronics

Perovskite V–NaNbO 3 embedded PDMS composite film-based robust hybrid nanogenerator for efficient mechanical energy harvesting

High-Efficiency Poly(Vinylidene Fluoride-Co-Hexafluoropropylene) Loaded 3D Marigold Flower-Like Bismuth Tungstate Triboelectric Films for Mechanical Energy Harvesting and Sensing Applications

Cellulose/BaTiO3 Aerogel Paper Based Flexible Piezoelectric Nanogenerators and the Electric Coupling with Triboelectricity

High-performance flexible lead-free piezo-antiferroelectric based on NaNbO3/PDMS composites for energy harvesting application

Tribo-piezoelectric Synergistic BaTiO 3 /PDMS Micropyramidal Structure for High-performance Energy Harvester and High-sensitivity Tactile Sensing

Remarkably enhanced hybrid piezo/triboelectric nanogenerator via rational modulation of piezoelectric and dielectric properties for self-powered electronics

Hybrid nanogenerators based on PVDF/6H–SiC composite film with enhanced mechanical energy utilization efficiency

Development of a flexible piezoelectric and triboelectric energy harvester with piezo capacitive sensing ability from barium tungstate nanorod-dispersed PVDF nanofabrics

Piezo-triboelectric hybridized nanogenerator embedding MXene based bifunctional conductive filler in polymer matrix for boosting electrical power

Enhanced Piezoelectric Energy Harvester by Employing Freestanding Single‐Crystal BaTiO3 Films in PVDF‐TrFE Based Composites

Mechanical Energy Harvesting and Specific Potential Distribution of a Flexible Piezoelectric Nanogenerator Based on 2-D BaTiO 3 -Oriented Polycrystals

Screen Printing of Surface-Modified Barium Titanate/Polyvinylidene Fluoride Nanocomposites for High-Performance Flexible Piezoelectric Nanogenerators

Flexible piezoelectric energy-harvesting nanogenerator using supersonically sprayed polyvinylidene fluoride and iron oxide nanocubes