Abstract:Sustainable ultrathin stretchable power sources have emerged with the development of wearable electronics. They obtain energy from living organisms and the environment to drive these wearable electronics. Here, an ultrathin stretchable and triboelectric nanogenerator (TENG) improved by chargeable carbon black (CB)/thermoplastic polyurethane (TPU) composite material (CT-TENG) is proposed for mechanical energy harvesting and physiological signal sensing. The CB/TPU composite can act as both a stretchable electrode and a triboelectric layer due to the coexistence of conductive CB and dielectric TPU. The CT-TENG demonstrates good stretchability (≈646%), ultrathin thickness (≈50 μm), and a lightweight (≈62 mg). The triboelectric electrode material can be improved by postcharging treatment. With the corona charging process, the output performance of the CT-TENG was improved eightfold and reached 41 V. Moreover, the CT-TENG with a self-powered sensing capability can inspect the amplitude and frequency of different physiological movements. Consequently, the CT-TENG is promising in promoting the development of electronic skins, wearable systems of self-powered sensors, human–machine interactions, soft robotics, and artificial intelligence applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13840.SEM images of the CB/TPU composites (Figure S1), electrical conductivity of different CB/TPU composites (Figure S2), image of a large-scale fabricated C-8 composite film (Figure S3), thickness and weight of the fabricated CT-TENG (Figure S4), FT-IR analysis of all of the CB/TPU composites (Figure S5), schematic diagram of the detailed change of the CT-TENG during the corona charging process (Figure S6), simulation of electrical potential distributions of the CT-TENG (Figure S7), variation trend and comparisons of outputs of all of the prepared CT-TENGs before and after corona charging (Figure S8), relationship between different frequencies and corresponding outputs (Figure S9), stretchability tests of the CT-TENG (Figure S10), relationship between different tensile strains and corresponding outputs (Figure S11), charging and discharging curves of a capacitor connected with a calculator (Figure S12), characterization of biocompatibility of the C-8 (Figure S13), physiological signals sensing setup of the CT-TENG and the measurement equipment (Figure S14), and signals of normal pulse and abnormal vascular occlusion event (Figure S15) (PDF)Video S1 (MP4)Video S2 (MP4)Video S3-revised-r2 (MP4)This article has not yet been cited by other publications.

Charge-defect tuned PVDF based ternary biocompatible composite as skin touch actuated single electrode triboelectric nanogenerator for wireless healthcare monitoring

A Highly Wearable Single-electrode Mode Triboelectric Nanogenerator Made of Flexible Polyvinylidene Fluoride Transparent Film for Muscular Motion Monitoring

Hybrid Piezoelectric/Triboelectric Wearable Nanogenerator Based on Stretchable PVDF-PDMS Composite Films

A biocompatible and antibacterial all-textile structured triboelectric nanogenerator for self-powered tactile sensing

Transparent and Stretchable Triboelectric Nanogenerator for Self-Powered Tactile Sensing

Revolutionizing energy harvesting: Eco-friendly and adaptable triboelectric sensors with recycled cloth and metallo-dielectric loaded Ecoflex hybrid films

PDA‐Ag/TiO2 Nanoparticles‐Loaded Electrospun Nylon Composite Nanofibrous Film‐Based Triboelectric Nanogenerators for Wearable Biomechanical Energy Harvesting and Multifunctional Sensors

Polyvinylidene Fluoride/Aromatic Hyperbranched Polyester of Third-Generation-Based Electrospun Nanofiber as a Self-Powered Triboelectric Nanogenerator for Wearable Energy Harvesting and Health Monitoring Applications

Flexible Nanogenerator from Electrospun PVDF-Polycarbazole Nanofiber Membranes for Human Motion Energy-Harvesting Device Applications

Ultrathin Stretchable Triboelectric Nanogenerators Improved by Postcharging Electrode Material

High power triboelectric nanogenerator based on nanofibers of silk protein and PVBVA and its motion sensing applications

Quenched PVDF/PMMA Porous Matrix for Triboelectric Energy Harvesting and Sensing

Triboelectric Touch Sensor Array System for Energy Generation and Self-Powered Human-Machine Interfaces based on Chemically Functionalized, Electrospun rGO/Nylon-12 and Micro-Patterned Ecoflex/MoS 2 Films

Rationally Improved Surface Charge Density of Triboelectric Nanogenerator with TiO2-MXene/Polystyrene Nanofiber Charge Trapping Layer for Biomechanical Sensing and Wound Healing Application.

Human Skin Based Triboelectric Nanogenerators for Harvesting Biomechanical Energy and As Self-Powered Active Tactile Sensor System.

Flexible and Wearable PDMS-Based Triboelectric Nanogenerator for Self-Powered Tactile Sensing

A flexible, sustainable, and deep learning-assisted triboelectric patch for self-powered interactive sensing and wound healing applications

Elevating the performance of nanoporous bismuth selenide incorporated arch-shaped triboelectric nanogenerator by implementing piezo-tribo coupling effect: harvesting biomechanical energy and low scale energy sensing applications

A high-performance, single-electrode and stretchable piezo-triboelectric hybrid patch for omnidirectional biomechanical energy harvesting and motion monitoring

Scalable fabrication of hierarchically structured graphite/polydimethylsiloxane composite films for large-area triboelectric nanogenerators and self-powered tactile sensing

Flexible single-electrode triboelectric nanogenerators with MXene/PDMS composite film for biomechanical motion sensors