Abstract:Fibrous porous materials are one of the most commonly used high-temperature insulation materials because of their high porosity and low thermal conductivity. Due to their wide applications in the aerospace and energy industries, the investigation of high-elastic thermally insulating porous materials has attracted increasing attention. In order to improve the elasticity of fibrous porous materials, quartz fibers with high aspect ratio were used as matrix, sodium hexametaphosphate (SHMP) was selected as dispersant. We innovatively reported that a unique three-dimensional skeleton structure was constructed by adjusting the dispersion of fibers in the slurry, and the lightweight, thermal insulating and elastic SiO2 fibrous porous material was then prepared by the compression molding method. The characterization results of zeta potential and absorbance showed that the addition of SHMP was an effective method to enhance the dispersibility of quartz fibers in the slurry. SiO2 fibrous porous materials with 0.4 wt% SHMP content exhibited an ideal three-dimensional skeleton structure, which endowed the porous material with high porosity (89.39%), low density (0.04751 g/cm3), and low thermal conductivity (0.0356 W·m−1·K−1). The three-dimensional skeleton structure formed by overlapping fibers with high aspect ratios endowed the porous material with excellent elasticity. SiO2 fibrous porous materials with 0.4 wt% SHMP content could undergo large strains of 30% and achieved a resilience ratio of 81.69% under the 30th compression cycle. Moreover, after heat treatment at 800 °C, SiO2 fibrous porous materials also maintained good elasticity with a resilience ratio of more than 80%.

Effects of volume fraction of short-cut quartz fibers on mechanical and thermal properties of SiO2f/SiO2 composites

Fabrication and properties of SiO2f/SiO2 composite ceramic based on stereolithography technology

Fabrication by stereolithography of fiber-reinforced fused silica composites with reduced crack and improved mechanical properties

Effect of fiber content on properties of a short carbon fiber reinforced fused silica matrix composite

Preparation and Properties of Highly Elastic, Lightweight, and Thermally Insulating SiO2 Fibrous Porous Materials

Fabrication and high-temperature strength of 2.5D SiO2f /SiO2 composites prepared by a combined vacuum impregnation and sol-gel method

Synthesis and Heat Insulation Performance of Glass Fiber Reinforced SiO2 Aerogel Composites

Effect of Fiber Content on Mechanical Property and Fracture Mechanisms of Cf/SiC Composites

Microwave absorption and mechanical properties of SiCf/SiOC composites with SiO2 fillers

Influence of Hot-Pressing Process on Microstructure and Mechanical Properties of SiO2f/SiO2 Composites

Investigation on Effect of Quartz Powder on Pperformance of Fiber Thermal Insulating Riser Material

Effect of Different Forms of Silica on Sintering, Microstructure and Properties of Borosilicate Glass/al2o3 Composites

Mechanical properties and damping capacity of SiC p /TiNi f /Al composite with different volume fraction of SiC particle

Effect of sintering temperature on the crystallization behavior and properties of silica filled PTFE composites

Effects of Content of Chopped Glass Fibers on the Properties of Silica Filled PTFE Composites

Effects of SiO2 Content on the Properties of PTFE/SiO2 Composites

Improving mechanical and thermal expansion properties of aluminum matrix composites reinforced by silicon carbide fiber

Effect of Diatomite Additive on the Mechanical and Dielectric Properties of Porous SiO2-Si3N4 Composite Ceramics

Mechanical Properties of Carbon Fiber Composites Modified with Nano-Sio2 in the Interphase

Preparation, Properties and Applications of Nanocomposites

Silica Bonded Mullite Fiber Composite with Isotropic Geometry and Properties for Thermal Insulating