Abstract:Porous organic polymers (POPs) have attracted much attention in numerous areas, including catalysis, adsorption and separation. Herein, POP supported Ziegler-Natta catalysts were designed for preparation of isotactic polypropylene (iPP). The POPs-based Ziegler-Natta catalysts exhibited the characteristic of broad molecular weight distribution (MWD > 11) with or without adding an extra internal electron donor. The added internal electron donor 3-methyl-5-tert-butyl-1,2-phenylene dibenzoate (ID-2) used in cat-2 showed good propylene polymerization activity of 15.3 x 10(6) g center dot PP/mol center dot Ti center dot h, high stereoregularity with 98.2% of isotacticity index and broad molecular weight distribution (MWD) of 12.3. Compared to the MgCl2-supported Ziegler-Natta catalysts (cat-4) with the same ID-2, cat-2 showed higher chain stereoregularity for propylene polymerization. As seen in the TREF results, the elution peak of PP-2 (124.0 degrees C, 91.7%) is 1.5 degrees C higher than the isotactic fraction from PP-4 (122.5 degrees C, 87.2%), and even 1.2 degrees C higher than PP-5 prepared from ID-3 with the characteristics of high stereoregularity. Moreover, the pentad methyl sequence mmmm of PP-2 (93.0%) from cat-2 is 0.5% higher than that of PP-4 from cat-4. XPS analysis revealed that the minute difference in binding energy of Ti, Mg, C and O atoms exist between the inorganic MgCl2 and the organic polymer based Z-N catalysts. The plausible interaction mechanism of active sites of Mg and Ti with the functional groups in the POP support and the added ID was proposed, which could be explained by their high stereoregularity and the broad molecular weight distribution of the POP-based Z-N catalysts.

Sulfonated porous organic polymer supported Ziegler–Natta catalysts for the synthesis of ultra-high molecular weight polyethylene

PREPARATION OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE USING STRUCTURED NANOPARTICAL ZIEGLER-NATTA CATALYSTS

ETHYLENE POLYMERIZATION WITH CORE-SHELL ZIEGLER-NATTA HYBRID CATALYSTS

Advanced Catalyst Technology for Broad/Bimodal Polyethylene, Achieved by Polymer-Coated Particles Supporting Hybrid Catalyst

Porous Organic Polymers-Supported Zeigler-Natta Catalysts for Preparing Highly Isotactic Polypropylene with Broad Molecular Weight Distribution

Highly Tunable Porous Organic Polymer (POP) Supports for Metallocene-Based Ethylene Polymerization

Porous Organic Polymers-Supported Metallocene Catalysts for Ethylene/1-Hexene Copolymerization

Synthesis of Pe with Broad Mwd Catalyzed by Supported Ziegler-Natta Catalyst Consisting of Cycloalkoxy Silane As Ied

Combination of 8‐aminoquinoline Nickel Dichloride and Cp2ZrCl2 Catalysts for Ethylene Polymerization

Study of Silica‐Supported Chromocene Catalysts for Ethylene Polymerization

Ethylene polymerization using a novel MgCl2/SiO2-supported Ziegler–Natta catalyst

Synthesis of Polyethylene with Bimodal Molecular Weight Distribution by Supported Iron‐based Catalyst

Syntheses of Novel Electron Donors and Their Application to Preparation of Catalysts for Polyethylene with Broad Relative Molecular Mass Distribution

Preparation and Characterization of Novel Polyethylene Supported Metallocene Catalysts

Silica-Supported Nickel and Zirconium Catalysts for Branched Polyethylene

PREPARATION OF NOVEL POLYETHYLENE-graft-POLY(4-VINYLPYRIDINE)-SUPPORTED METALLOCENE CATALYSTS FOR ETHYLENE POLYMERIZATION

Facile high-temperature synthesis of weakly entangled polyethylene using a highly activated Ziegler-Natta catalyst

Synthesis of (co-)polyethylene with broad molecular weight distribution by the heterogenous Ziegler–Natta catalysts via one-pot strategy

Simple and Sterically Open Nickel Catalyst for Ultrahigh Molecular Weight Polyethylene Synthesis

High Efficiency Synthesis of Isotactic Polypropylene and Linear Polyethylene Using a New C2-symmetric Carbon-Bridged Zirconocene Catalyst

A Novel Catalytic System of [O,O] Bidentate Titanium Complexes and Et2AlCl/Bu2Mg for the Production of Ultra‐High Molecular Weight Polyethylene