Abstract:Here we proposed a low-cost and high-efficiency strategy for fabricating novel multi-scale gradient-structured/heterogeneous lamella structured (GS/HLS) pure titanium laminates with superior strength-ductility synergy, by temperature-controlled rolling and subsequent annealing of as-sintered multilayered pure titanium foils with preset grain size gradient. A preliminary gradient structure with the average grain size decreasing from the center layer (alternating stacking of equiaxed fine grain bands and elongated grain bands) to the surface layer (equiaxed fine grains) is formed by optimizing the rolling process. Generalized Schmidt factor analysis based on electron backscatter diffraction indicated that there were slip-dominated and twin-dominated grain refinement mechanisms during the rolling process. In addition to the prismatic slip, two kinds of contraction twinning could be activated to achieve the grain refinement in hard domains where slip systems were hard to be activated. After subsequent annealing, equiaxed fine grains in the laminates did not significantly coarsen, while the elongated grains in the center layer had partially merged and grew up into the elongated coarse grains. Thus, the microstructure of the center layer displayed a typical heterogeneous lamella structure composed of alternately stacking of elongated coarse grains and fine grain bands, together with the grain size gradient, a unique multi-scale heterostructured titanium laminate was formed. Tensile test indicated that the as-rolled Ti laminates exhibited extremely high ultimate tensile strength (UTS) of 930 MPa with an acceptable total elongation to fracture (ETF) of 12.3 %, while GS/HLS Ti laminates after annealing at 425 °C possessed a superior combination of high UTS (823 MPa) and high ETF (22.4 %). The main reason was that the annealing treatment significantly reduced the dislocation density in the elongated coarse grains of GS/HLS Ti laminates. This meant that more geometrically necessary dislocations (GNDs) could accumulate in the plastic deformation process, resulting in the hetero-deformation induced (HDI) strengthening and an extra HDI hardening caused by the unique GS/HLS structure, therefore, an excellent strength-ductility synergy of final GS/HLS Ti laminates was achieved.

Fabrication and mechanical properties of dual-heterogeneous titanium-based composites

Enhancing Ductility of Titanium Matrix Composites by Multimodal Α-Grains

Micromechanical modeling for mechanical properties of gradient-nanotwinned metals with a composite microstructure

Introducing β-Ti ductile-zones for enhancing both strength and ductility in heterostructured titanium alloy composites

Loss-free tensile ductility of dual-structure titanium composites via an interdiffusion and self-organization strategy

Strength-ductility synergy in 3D-printed (TiB + TiC)/Ti6Al4V composites with unique dual-heterogeneous structure

Effect of compositional heterogeneity on the mechanical properties of a single-phase Cu-9Al alloy with different grain sizes

Temperature-dependent reversed fracture behavior of multilayered TiBw/Ti–Ti(Al) composites

Towards strength-ductility enhancement of titanium matrix composites through heterogeneous grain structured Ti matrix design

Extraordinary tensile properties of titanium alloy with heterogeneous phase-distribution based on hetero-deformation induced hardening

Fabrication of dual-gradient microstructure and their effects on the mechanical properties of commercial pure Ti

Heterostructures Enhance Simultaneously Strength and Ductility of a Commercial Titanium Alloy

Simultaneously enhancing strength and ductility of HCP titanium via multi-modal grain induced extra dislocation hardening

Towards understanding the structure–property relationships of heterogeneous-structured materials

Heterogeneous network structures formed in TiC/TC4/β-Ti composites for enhancing both strength and ductility

Achieving superior strength-ductility synergy in a unique multi-scale heterostructured titanium laminate fabricated by temperature-controlled rolling and subsequent annealing

Design strategy of TiC reinforced heterogeneous Ti-composites with an induced slip system for achieving high strength-ductility

Hierarchically heterogeneous strategy for Ti 2 AlC/TiAl composite with superior mechanical properties

Fabrication of heterostructured Ti alloys with exceptional strength and ductility by direct laser deposition

Constitutive Behavior of Titanium Alloy with Dual-Phase Microstructures: Experiments and Modeling

Study on Microstructures and Mechanical Properties of Layered and Layered‐Gradient Zr/Ti Materials