Abstract:Adding oxygen into the lead-cooled fast reactor (LFR) to generate a protective oxide layer is one of the most promising methods to mitigate the corrosion of structural materials caused by flowing lead-based coolants such as lead–bismuth eutectic (LBE). In LFRs, the growth-removal behavior of the protective oxide layer is influenced by various factors such as temperature, oxygen concentration, coolant velocity, and etc. Meanwhile, the formation of the oxide layer also changes the thermal–hydraulic characteristics and neutronics parameters of the reactor core. Historically, there has been a lack of research on the coupling effects of neutronics-thermal-hydraulics-materials (N-TH-M) under oxidation-corrosion conditions. In this paper, an N-TH-M multi-physics fields coupling framework was developed to study the key coupling parameters and oxidation corrosion characteristics of an LFR fuel assembly. The results indicate that the formation of the double oxide layer deteriorates the heat transfer between LBE/cladding, which results in the increases of 17.51 K and 10.04 K for maximum temperatures of fuel and cladding under the high oxygen concentration condition. The outer magnetite layer is severely dissolved by flowing LBE, while the inner Fe-Cr spinel layer exhibits good −dissolution resistance. The increase in oxygen concentration can inhibit the dissolution of magnetite and increase the thickness of magnetite, resulting in a 71 % reduction in the average removal thickness and a 5.88 μm increase in the average thickness of the magnetite layer. However, it has no significant effect on Fe-Cr spinel. The rise in coolant inlet temperature has a promoting effect on both the growth and the dissolution of the double oxide layer. With rise of coolant inlet temperature, the growth-promoting effect increases the average thickness of the double oxide layer from 14.11 μm to 27.82 μm. Additionally, the increase in coolant inlet velocity usually has a negative impact on the double oxide layer thickness.

Assessing the impact of CPs transfer on corrosion behavior in the liquid lead-bismuth eutectic cooled system

Review of the studies on fundamental issues in LBE corrosion

Numerical simulation of corrosion phenomena in oxygen-controlled environment for a horizontal Lead-bismuth reactor core

Numerical study of solid-state oxygen control bypass performance and corrosion distribution in a LBE flow loop

The study of corrosion characteristics of lead–bismuth eutectic supercritical carbon dioxide microchannel heat exchanger

Long-Term Behaviors of Oxide Layer in Liquid Lead–Bismuth Eutectic (LBE), Part I: Model Development and Validation

Prediction of Dissolved Impurities and Movement of Oxide Particles in the Primary Circuit of LBE Fast Reactor

Development of oxygen/corrosion product mass transfer model and oxidation-corrosion model in the lead-alloy cooled reactor core

Oxygen Transport Analysis in Lead-Bismuth Eutectic Coolant for Solid-Phase Oxygen Control

Effect analysis of oxide layer on thermal hydraulic characteristics of LBE cooled reactor

Numerical investigation on the Multi-Physics coupling characteristics of Lead-Bismuth reactor fuel assembly based on oxidation corrosion behaviors

Numerical study on the heat transfer characteristics of a liquid lead–bismuth eutectic in a D-type channel

Corrosion Kinetics and Mechanisms of 15-15Ti Steel in Flowing Liquid Lead-Bismuth Eutectic at 500°C

Localized corrosion behavior on a heterogeneous surface involving multicomponent reactive transport and morphology evolution

Study on coupled heat transfer model and enhanced heat transfer law of liquid metals and supercritical fluids

A synergy of different corrosion failure modes pertaining to T91 steel impacted by extreme lead–bismuth eutectic flow pattern

Assessment Study Of Relap5/Scdap Capability To Reproduce Liquid Metal Fluid Thermal Hydraulic Behaviour

Corrosion Studies in Support of Medium-Power Lead-Alloy-Cooled Reactor

Long-Term Behaviors of Oxide Layer in Liquid Lead–Bismuth Eutectic (LBE), Part II: Model Applications

Numerical study on thermal-hydraulic characteristics of lead-bismuth loop system under moving conditions

Study of lead-bismuth eutectic on material performance degradation and life assessment for modified 9Cr-1Mo steel under low cycle fatigue at high temperatures