Abstract:Objective. Connectors for implantable neural prosthetic systems provide several advantages such as simplification of surgery, safe replacement of implanted devices, and modular design of the implant systems. With the rapid advancement of technologies for neural implants, miniaturized multichannel implantable connectors are also required. In this study, we propose a reconnectable and area-efficient multichannel implantable connector.Approach. A female-to-female adapter was fabricated using the thermal-press bonding of micropatterned liquid crystal polymer films. A bump inside the adapter enabled a reliable electrical connection by increasing the contact pressure between the contact pads of the adapter and the inserted cable. After connection, the adapter is enclosed in a metal case sealed with silicone elastomer packing. With different sizes of the packings, leakage current tests were performed under accelerated conditions to determine the optimal design for long-term reliability. Repeated connection tests were performed to verify the durability and reconnectability of the fabricated connector. The connector was implanted in rats, and the leakage currents were monitored to evaluate the stability of the connectorin vivo. Main results. The fabricated four- and eight-channel implantable connectors, assembled with the metal cases, had a diameter and length of 6 and 17 mm, respectively. Further, the contact resistances of the four- and eight-channel connectors were 53.2 and 75.2 mΩ, respectively. The electrical contact remained stable during repeated connection tests (50 times). The fabricated connectors with packings having 125%, 137%, and 150% volume ratios to the internal space of the metal case failed after 14, 88, and 14 d, respectively, in a 75 °C saline environment. In animal tests with rats, the connector maintained low leakage current levels for up to 92 d.Significance. An implantable and reconnectable multichannel connector was developed and evaluated. The feasibility of the proposed connector was evaluated in terms of electrical and mechanical characteristics as well as sealing performance. The proposed connector is expected to have potential applications in implantable neural prosthetic systems.

Miniature Optical Connector With Magnetic Attraction Structure

A Novel Designed Load Adaptive Noncontact Wet-Mate Connector for Subsea Devices

Mnf-Based Photonic Components And Devices

Magnetic Interconnects Based on Composite Multiferroics

Multi-fiber connector using a solid refractive-index-matching material formed on MT ferrule for ultra-multi-fiber connection

Universal and Versatile Magnetic Connectors for Microfluidic Devices

Magnetic-Ionic-Liquid-Functionalized Photonic Crystal Fiber for Magnetic Field Detection

Synthetic Multiferroic Interconnects for Magnetic Logic Circuits

Smart Manipulation of Complex Optical Elements via Contact‐adaptive Dry Adhesives

Development of a miniaturized, reconnectable, and implantable multichannel connector

A Novel Zero-Insertion-Force (ZIF) Micro $(\mu)$ -Connector: Design, Fabrication, and Measurements

A Miniature Reflective Micro-Force Sensor Based on A Microfiber Coupler

SMF-MMF-SCF-Based Humanoid-Shaped Fiber-Optic Sensor for Wide Range of Magnetic Field Detection

Novel Coupling Coaxial Adapter for Portable Passive Intermodulation Test of Coaxial Cable

Acarid Suction Cup‐Inspired Rapid and Tunable Magnetic Adhesion

Micromanipulation System for Microscale Magnetic Component Alignment and Assembly

Magnet-coil Force Actuator for Microtensile Test Device

ModMag: A modular magnetic micro-robotic manipulation device

High-Sensitivity Actuator with New Magnetic Circuit in Optical Pickup

All‐Dielectric Fiber Meta‐Tip for Alignment‐Tolerant Bidirectional Interconnect Between Single‐Mode and Multi‐Mode Fibers

Magnetic Concentric Hot-Circle Generation at Optical Frequencies in All-Dielectric Mesoscale Janus Particles