Abstract:Background: With the development of wearable health-monitoring technologies, a variety of textile electrodes have been produced and applied by researchers. However, there are no universal and effective methods even testing platforms for evaluating the skin-electrode electrochemical interface for textile electrodes because different human bodies have different skin characteristics. Methods: An electrochemical modeling and evaluation for textile electrodes to skin was proposed, and two electrochemical evaluation platforms (EEP) were set up based on two simulated skin models (SSM). First, skin-electrode electrochemical interface (SEEI) models for traditional wet electrodes and textile electrodes were analyzed. Based on the SEEI models and YY/T 0196-2005 (Chinese YY/T pharmaceutical industry standard for disposable ECG electrode), three skin-electrode electrochemical characteristics (SEEC), including skin-electrode static impedance (SESI), skin-electrode alternating current impedance (SEAI), and skin-electrode polarization voltage (SEPV), were proposed. Then, three electrochemical evaluation methods for textile electrodes to skin were proposed and analyzed, which were the correlation between SEEC and skin-electrode contact pressure (SECP), skin-electrode relative movement (SERM), and conduction loss of active signals (CLAS). Finally, an electrochemical evaluation platform was set up based on an active simulated skin model (ASSM) and passive simulated skin model (PSSM). Results: 9 feature parameters based on the passive electrochemical evaluation platform (PEEP) and 11 feature parameters based on the active electrochemical evaluation platform (AEEP) were obtained for evaluating textile electrodes. And four kinds of textile electrode characteristics including SEEC, SECP, SERM, and CLAS were quantitatively measured based on the electrochemical evaluation platform, and the testing accuracy and range for these characteristics were measured separately. Finally, correlation between SEEC and SECP for 10 kinds of textile electrode samples was studied, and 14 electrochemical characteristics and four skin-electrode contact pressure characteristics were extracted. Experimental results showed that significant correlations were found between six SEEC characteristics and SECP characteristics, and the correlation coefficient between ACI_3 and USECP was the highest. And the polarization voltages of most dry electrode samples showed a downward trend with the increase of contact pressure. Conclusions: The electrochemical evaluation platform yielded effective experimental data and could provide strong support for the evaluation and application of textile electrodes, which was also effective in evaluating other bioelectric electrodes such as 3M electrode, stainless steel electrode, dry electrode and microneedle electrode.

Electrofluidic control for textile‐based cell culture: Identification of appropriate conditions required to integrate cell culture with electrofluidics

Novel 3D textile structures and geometries for electrofluidics

Novel Approach toward Electrofluidic Substrates Utilizing Textile-Based Braided Structure

Tuning the electrophoretic separations on a surface-accessible and flexible fibre-based microfluidic devices

New Microfluidic System for Electrochemical Impedance Spectroscopy Assessment of Cell Culture Performance: Design and Development of New Electrode Material

Solution fibre spinning technique for the fabrication of tuneable decellularised matrix-laden fibres and fibrous micromembranes

Ionofibers: Ionically Conductive Textile Fibers for Conformal i‐Textiles

Integrating conductive electrodes into hydrogel-based microfluidic chips for real-time monitoring of cell response

A Three-Dimensional Electrochemical Biosensor Integrated with Hydrogel Enables Real-Time Monitoring of Cells under Their In Vivo -like Microenvironment

Quasi‐Homogeneous and Hierarchical Electronic Textiles with Porosity‐Hydrophilicity Dual‐Gradient for Unidirectional Sweat Transport, Electrophysiological Monitoring, and Body‐Temperature Visualization

Microfluidics-Based Fabrication of Cell-Laden Hydrogel Microfibers for Potential Applications in Tissue Engineering.

Additive batch electrospinning patterning of tethered gelatin hydrogel fibres with swelling-induced fibre curling

Uniform and welded networks of silver nanowires surface-embedded on cellulose yarns with PEDOT:PSS passivation for sustainable E-textiles

Microfluidic channel sensory system for electro-addressing cell location, determining confluency, and quantifying a general number of cells

3D E-textile for Exercise Physiology and Clinical Maternal Health Monitoring

Creating Polymer Hydrogel Microfibres with Internal Alignment Via Electrical and Mechanical Stretching

Electrochemical modeling and evaluation for textile electrodes to skin

Electrode-Integrated Textile-Based Sensors for In Situ Temperature and Relative Humidity Monitoring in Electrochemical Cells

Composite Living Fibers for Creating Tissue Constructs Using Textile Techniques

Horizontally structured microbial fuel cells in yarns and woven fabrics for wearable bioenergy harvesting

Microfluidic system for cell mechanics analysis through dielectrophoresis