Abstract:MgO–CaO composites are basic materials with high melting points, high chemical resistance to alkaline environments, clean steel production, environmental friendliness, and abundant sources. In the current work, carbon nanofibers (CNFs) with diameters between 150 to 270 nm were prepared at different temperatures (up to 1200 °C) by carbonization of electrospun polyacrylonitrile (PAN) precursors. Then, the MgO–CaO composites were prepared in two steps. First, 3 wt% CNFs carbonized at different temperatures were added to the composite to determine the optimal carbonization temperature. Subsequently, the physical properties (apparent porosity and bulk density) and mechanical properties (flexural strength (FS) and cold crushing strength (CCS)) of the MgO–CaO-CNF composites were investigated. X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM), Energy-Dispersive X-ray spectroscopy (EDS), and thermogravimetric analysis (TGA) were used to analyze the composition, morphology, and structure of the CNFs powders and composite samples. Based on the results obtained, such as the percentage graphitization, length, average diameter, and morphology of the CNFs, 1000 °C was determined as the appropriate carbonization temperature for the next steps of this study. In a second step, the CNFs synthesized at 1000 °C were added to the MgO–CaO with different wt% (0, 0.5, 1, 1.5, 2, 2.5, and 3 wt%). It was found that by adding CNFs (up to 1.5 wt%) into the MgO-CaO composites, the physical properties increased due to the improvement of densification, and mechanical properties improved due to the activation of reinforcing mechanisms, the reduction of surface defects and the creation of a dense body. However, these properties decreased from 1.5 to 3 wt% due to the agglomeration and poor dispersion of the CNFs. Finally, the results illustrated that adding CNFs, even in small amounts, significantly improved the features of MgO-CaO compounds; the ideal content was 1.5 wt% CNFs.

Effects of carbonization temperature on structure and mechanical strength of electrospun carbon nanofibrous mats

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

The effect of using two stabilization temperatures and fixation process on preparation of carbon nanofibers

Effect of stabilization and carbonization treatment on the chemical and physical transformation of polyacrylonitrile (PAN) based electrospun carbon nanofibers

A comprehensive study on the effect of carbonization temperature on the physical and chemical properties of carbon fibers

Effect of amorphous carbon on the tensile behavior of polyacrylonitrile (PAN)-based carbon fibers

Carbon Welding by Ultrafast Joule Heating.

Molecular structure effects of mesophase pitch and isotropic pitch on morphology and properties of carbon nanofibers by electrospinning

Effect of carbon nanofibers fabricated from electrospun PAN precursors on the characteristics and Densification of MgO–CaO Ceramic systems

Carbon Nanofibers Production via the Electrospinning Process

Effect of Carbonization Temperature on Microstructures and Properties of Electrospun Tantalum Carbide/Carbon Fibers

Effect of Heating Rate on Morphology and Structure of Cofe2o4 Nanofibers

The Effects of Morphology and Temperature on the Tensile Characteristics of Carbon Nitride Nanothreads.

Tailoring microstructures of carbon fiber reinforced carbon aerogel-like matrix composites by carbonization to modulate their mechanical properties and thermal conductivities

Properties of Carbon Nanofibers Prepared from Polyacrylonitrile/Poly(methyl Methacrylate) Blend

Effects of Heat-Treatment on the Microstructure, Electromagnetic Wave Absorbing Properties, and Mechanical Properties of SiCN Fibers

Increased Mechanical Properties of Carbon Nanofiber Mats for Possible Medical Applications

Understanding the behaviors of ZIF-67 reinforced electrospun carbon nanofibers in the preparation and stabilization

Research on dynamic microwave low-temperature carbonization of high performance carbon fiber

Significant Improvement of Mechanical Properties Observed in Highly Aligned Carbon-Nanotube-Reinforced Nanofibers

Enhancing mechanical strength of electrospun nanofibers by coaxial electrospinning and thermal treatment