Abstract:The research has been carried out for the purpose of a complex numerical three-dimensional modeling of the stressed state of taps and tees of main gas pipelines taking into account the gas-dynamic processes occurring in these shaped elements and the temperature difference in their walls. A 3D modeling of the elbow with a 90° angle and a reinforcing pad on the main line and the drainage of the passage line of the trunk of the main gas pipeline has been carried out. There has been studied the gas flow with 3D models of shaped elements of the main gas pipeline by means of the CFD modeling. The simulation has been рerformed for the equidistant tees in which the entire flow from the main stream flows into its branch. The mathematical model is based on the solution of the Navier–Stokes equation system, continuity equation, closed by a two-parametric k -e model of the Launder–Sharma turbulence with corresponding initial and boundary conditions. The simulation results are visualized in the ANSYS Fluent R18.2 Academic Postprocessor by constructing the pressure fields on the contours and in the longitudinal and transverse sections of shaped elements. The exact values of pressure at different points of the inner cavity of the shaped elements have been determined, the places of rise and fall of pressure identified. There have been performed the simulation of the temperature difference in the walls of the drainage, the trunk of the main gas pipeline in the module ANSYS Transient Thermal. The results of CFD and temperature modeling were imported into the mechanical module ANSYS Static Structural, where the finite element method was used to simulate the stressed state of the shaped elements of the main gas pipeline, taking into account the gas-dynamic processes occurring in their internal cavity and the temperature difference in the walls. The results of the simulation have been visualized by constructing a three-dimensional color fields of equivalent von Mises stresses in the tee and in the elbow. The places of the maximum equivalent stresses in the wall of the studied shaped elements have been revealed.

Experimental Evalua tion of the Mechanical Properties of the Metal of the Characteristic Zones of Typical Pipeline Elements

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

Assessment of Operational Degradation of Pipeline Steels

Mechanical Properties of Gas Main Steels after Long-Term Operation and Peculiarities of Their Fracture Surface Morphology

DEVELOPMENT OF LOADING MODELS AND ANALYSIS OF THE STRESS-STRAIN STATE OF THE MAIN GAS PIPELINE WITH COMPOSITE LININGS

Qualimetric Analysis of Pipelines with Corrosion Surfaces in the Monitoring System of Oil and Gas Enterprises

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Reliability-Based Framework for Determination of Fitness for Service of Corroding Metal Pipes

The Structural-Mechanical State of 12Kh1MF Steel of TPP Pipeline Bend after Long-Term Operation

A Damage Mechanics based Evaluation of Dynamic Fracture Resistance in Gas Pipelines

Evaluation of Failure Pressure for Gas Pipelines with Combined Defects

COMPUTATIONAL AND EXPERIMENTAL STUDY OF THE STRESS-STRAIN STATE OF A PIPE UNDER EXTERNAL RADIAL LOAD, INTERNAL PRESSURE AND TEMPERATURE DIFFERENCE

Novel approach for numerical evaluation of limiting state and reliability of corroded pipelines under in-service repair welding

Analysis of Mechanical Properties of Welded Joint Metal from TPP Steam Piping after Its Operational Degradation and Hydrogenation

Investigation of welded joints of long-term operated gas pipeline controllable rolled X70 steel

Methods for the residual life assessment of corroded gas pipelines

The ANALYSIS of the MECHANICAL PROPERTIES of REGIONAL PIPELINES

Investigation of strength of shaped elements of the main gas pipeline

Dynamic Ductile Fracture Toughness Test and Numerical Simulation for Ultra-High Pressure Gas Pipelines

The Research on the Stress Analysis of Overhead Steam Pipeline