Abstract:Fiber optic extrinsic Fabry-Perot interferometric (EFPI) sensors are ideal candidates for on-line partial discharges (PDs) monitoring due to their inherent advantages, such as immunity to electromagnetic interference (EMI), highly compact sensing probes, and remote signal transmission. However, up to date, the design and fabrication of high-performance sensing diaphragms still remain challenging, and most of the reported diaphragms utilize circular structures with the peripheral sidewalls completely fixed. Herein, a novel EFPI ultrasonic sensor for on-line PDs monitoring is demonstrated. The proposed sensing diaphragm combines a silicon beam-supported diaphragm and a fixed boundary ring with a thickness of 5 µm, which was optimized through the multi-objective genetic algorithm (MOGA) revealing its high design flexibility and manufactured by using the microelectromechanical systems (MEMS) processing technology on a silicon-on-insulator (SOI) wafer. Compared with the circular and beam-supported diaphragm, the developed structure exhibits a higher sensitivity. The testing results show that the developed sensor owns the sensitivity and noise-limited minimum detectable ultrasonic pressure (MDUP) of -10 dB re. 1V/Pa and 63 µPa/sqrt(Hz) at its designed resonant frequency, respectively. Finally, the sensor's ability to detect PDs is validated in a temporary built PDs experimental environment, further proving its great potential to perform the on-line PDs monitoring.

A fiber-optic Fabry-Perot acoustic sensor based on PDMS diaphragm

Small In-Fiber Fabry-Perot Low-Frequency Acoustic Pressure Sensor with PDMS Diaphragm Embedded in Hollow-Core Fiber

Fabry–Perot acoustic sensor based on a thin gold diaphragm

MEMS-on-fiber sensor combining silicon diaphragm and supporting beams for on-line partial discharges monitoring

High Sensitivity and High Stability Dual Fabry-Perot Interferometric Fiber-Optic Acoustic Sensor Based on Sandwich-Structure Composite Diaphragm

An Acoustic Sensor Based on Active Fiber Fabry-Pérot Microcavities

A High-Sensitivity Fiber-optic Fabry-Perot Gas Pressure Sensor with Epoxy Resin Adhesive

Diaphragm Based Long Cavity Fabry–Perot Fiber Acoustic Sensor Using Phase Generated Carrier

High-Sensitivity EFPI-Based Acoustic Sensor Using in-Fiber Collimator and Adjustable 45° Mirror

High-Sensitivity Low-Frequency Fabry-Perot Ultrasonic Hydrophone With Chitosan Diaphragm

Compact highly sensitive Fabry-Perot temperature and gas pressure sensing probe fabricated by a femtosecond laser and PDMS

Fiber optic Fabry–Perot sensor that can amplify ultrasonic wave for an enhanced partial discharge detection

High-sensitivity fiber-optic low-frequency acoustic detector based on cross-correlation demodulation

Fabry-Perot cavity filled with PDMS for high sensitivity gas pressure sensor

Ultra-High-Sensitivity, Miniaturized Fabry-Perot Interferometric Fiber-Optic Microphone for Weak Acoustic Signals Detection

Flexible Optical Fiber Fabry–Perot Interferometer Based Acoustic and Mechanical Vibration Sensor

High-Performance Extrinsic Fabry-Perot Fiber Optic Acoustic Sensor Based on Au/PI Composite Film

Membrane-free fiber-optic Fabry-Perot gas pressure sensor with Pa-level resolution

Fabry-Perot Interference Fiber Acoustic Wave Sensor Based on Laser Welding All-Silica Glass

A Grating Interferometric Acoustic Sensor Based on a Flexible Polymer Diaphragm

An optical fiber Fabry–Pérot micro-pressure sensor based on beam-membrane structure