Abstract:Ultrasound-assisted extraction is compared with slurry sampling and microwave-assisted acid digestion for the determination of cadmium, lead and copper in biological samples and cadmium in sediment samples by electrothermal atomic absorption spectrometry (ETAAS). The main advantage of using an ultrasound-assisted extraction in comparison to slurry sampling is a doubling of the tube lifetime for all the chosen analytes, most likely because the sample matrix was not introduced into the atomiser, avoiding the build up of carbonaceous residues or silicates on the graphite platform. Consequently the analytical variable costs were remarkably diminished. In comparison to microwave-assisted digestion, ultrasound-assisted extraction resulted typically in a two-fold better precision and better detection limits. For the extraction, slurries in nitric acid were sonicated for 2–5 min using a titanium probe. Subsequently, the solid phase was separated by centrifugation, and 20 µl of the liquid phase was introduced into a graphite tube previously treated with a W–Rh permanent modifier. For slurry sampling, the slurries were sonicated for 20 s before being delivered to the W–Rh treated platform. Nitric acid concentration, sonication time, sonication power, sample mass and particle size were optimised for each analyte to obtain quantitative recoveries. For cadmium the optimum conditions (sediments and biological materials) were, 0.2–3.0% m/v slurry, 0.5% HNO3, 2 min sonication at 15 W. For copper and lead (biological materials only) the optimum conditions were 0.2–2.0% m/v slurry, 5.0% HNO3, 5 min 35 W. The particle size chosen for all analytes was <30 µm. For biological materials, the extraction recoveries were: Cd, 95–105%; Cu, 90–101%; and Pb, 88–98%. However, only cadmium was quantitatively extracted (based on the certified values of the reference materials) from sediment samples (recoveries 92–95%). For Pb and Cu the maximum recoveries attained were 54% and 60% respectively. Detection limits, based on integrated absorbance for the extracts of a 2.5% m/v biological material were: Cd, 3.0 ng g−1; Cu, 88 ng g−1; and Pb, 55 ng g−1. For 0.5% m/v sediment the cadmium detection limit was 15 ng g−1.

Elemental Analysis of Dietary Supplements by Microwave-Induced Plasma–Optical Emission Spectrometry (MIP-OES) With Ultrasound-Assisted Extraction (UAE)

Simultaneous Determination of 20 Heavy Metals and Trace Elements in Sargassum Pallidum and Sargassum Fusiforme and Its Adulterants by Microwave Digestion-ICP-MS

Multivariate optimization of an ultrasound-assisted extraction procedure for the determination of Cu, Fe, Mn, and Zn in plant samples by flame atomic absorption spectrometry

A new ultrasound-assisted microextraction for elemental impurities determination in tablets by ICP-MS according to USP chapters 232 and 233

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Microwave-assisted digestion using dilute nitric acid solution and investigation of calibration strategies for determination of As, Cd, Hg and Pb in dietary supplements using ICP-MS

Comparison of ultrasound-assisted extraction, slurry sampling and microwave-assisted digestion for cadmium, copper and lead determination in biological and sediment samples by electrothermal atomic absorption spectrometry

Method Development for Simultaneous Determination of Transition (Au, Ag, Cd, Cu, Mn, Ni, Pb, Zn) and Noble (Pd, Pt, Rh) Metal Volatile Species by Microwave-Induced Plasma Spectrometry Using Ultrasonic Micronebulizer Dual Capillary Sample Introduction System

Development of an Analytical Method for the Determination of Metals in Chicken Breast by Microwave Induced Plasma Optical Emission Spectrometry (MIP-OES)

Determination of metallic nanoparticles in soils by means spICP-MS after a microwave-assisted extraction treatment

Determination of Metallic Element in Soybean Coat by Fermentation-Microwave Digestion-Microwave after Semi-Ashing Plasma Torch Atomic Emission Spectrometry

Determination of Fe, Cu, and Pb in edible oils using choline chloride:ethylene glycol deep eutectic solvent-based dispersive liquid-liquid microextraction associated with microwave-induced plasma optical emission spectrometry

Simultaneous Determination of Sulfonamides and Metabolites in Manure Samples by One-Step Ultrasound/microwave-Assisted Solid–liquid–solid Dispersive Extraction and Liquid Chromatography–mass Spectrometry

Simultaneous determination and speciation analysis of arsenic and chromium in iron supplements used for iron-deficiency anemia treatment by HPLC-ICP-MS

Inductively Coupled Plasma Collision Cell Quadrupole Mass Spectrometric Determination of Extractible Arsenic, Cadmium, Chromium, Lead, Mercury, and Other Elements in Food Using Microwave-Assisted Digestion: Results from an FDA Interlaboratory Study

Ultrasound-assisted extraction of Pb, Cd, Cr, Mn, Fe, Cu, Zn from edible oils with tetramethylammonium hydroxide and EDTA followed by determination using graphite furnace atomic absorption spectrometer

A robotic magnetic nanoparticle solid phase extraction system coupled to flow-batch analyzer and GFAAS for determination of trace cadmium in edible oils without external pretreatment

Greening Ultrasound-Assisted Extraction for Sorghum Flour Multielemental Determination by Microwave-Induced Plasma Optical Emission Spectrometry

Determination of elements in cereals, pseudocereals, and legumes by microwave plasma-atomic emission spectrometry

The development and validation of a new method for the fast determination of Al, Ba, Ca, Cu, Fe, K, Mg, Mn, Na, Sr, and Zn in rice by inductively coupled plasma optical emission spectrometry

Dispersive liquid-liquid microextraction as a preconcentration alternative to increase ETAAS sensitivity in the analysis of molybdenum in bovine meat and pasture samples