Abstract:Parabolic trough collector is the most mature and widely deployed concentrated solar power technology with temperature ranging from 325 to 700 K. In this study, three different absorber tube geometries (smooth absorber tube, absorber tube with twisted tape insert and tube with longitudinal fins) of commercially available LS-2 collector are modeled and investigated using engineering equation solver. The objective of this study is to present a numerical comparative analysis of the available thermal enhancement techniques. Comprehensive energetic and exergetic performance of different tube geometry configurations using Al 2 O 3 /water as a heat transfer fluid has been compared to assess the nature of exergy destruction due to the fluid’s pressure, due to the heat transfer between sun and the receiver wall and due to the temperature difference between receiver wall and heat transfer fluid temperature. Furthermore, pure base fluid (water) along with the nanofluid is used to evaluate the system’s performance (thermal efficiency, exergetic efficiency, heat transfer coefficient, receiver temperature, pressure drop, pumping work demand and friction factor). Smooth absorber tube with pure base fluid is the reference case, while five cases (smooth tube with nanofluid, tube with pure water and fins inserted, tube with nanofluid and fins inserted, tube with pure water and twisted tape inserted, tube with nanofluid and twisted tape inserted) are investigated. Thermal efficiency of absorber tube with twisted tape insert and nanofluid is almost 72.26%, followed by tube with internal fins (72.10%), while smooth absorber tube has nearly 71.09%. Heat transfer coefficient of twisted tape inserted tube with nanofluid and longitudinal fins tube with nanofluid is greater than smooth absorber tube to almost 118.23% and 103.26%, respectively. The emphasis is also given to the pressure drop of the examined cases as it depends up on the friction factor of the absorber tubes. The use of nanofluid and twisted tape inserts leads to higher thermal enhancement, followed by the nanofluid and internal fins inserted tube. The nanoparticle concentration is also varied to investigate its effect on different performance parameters of the system.

Investigation of thermal performance and entropy generation rate of evacuated tube collector solar air heater with inserted baffles and metal foam: A CFD approach

Optimizing of a metal foam-assisted solar air heater performance: a thermo-hydraulic analysis of porous insert placement

Performance improvement of photovoltaic-thermal collector equipped with copper metal foam air channel

Investigation of Performance and Entropy Generation Rate of Direct Contact Membrane Distillation (DCMD) with Metal Foam: A CFD Study

Thermal performance evaluation of a solar air heater integrated with helical tubes carrying phase change material

Optimizing thermal performance in tube-in-tube heat exchangers with metal foam inserts: experimental and RSM analysis

CFD study of a dual-passage solar collector with longitudinal and transverse baffles for enhanced thermal performance

Optimizing heat transfer within a rectangular channel through intermittent metal foam block configurations: A numerical study

Effect of the baffle's type on thermal performance of solar air heaters

Numerical Simulation of the Thermal Performance of a Tubular Solar Air Heater

Enhanced performance assessment of an integrated evacuated tube and flat plate collector solar air heater with thermal storage material

Assessing the effects of different finned absorbers with swirl flow on the performance of solar air heater

Experimental study on the thermal performance of a solar air heater integrated with multi-geometry arrangements over the absorber plate

On the Efficiency of Air-Cooled Metal Foam Heat Exchangers

Comparative performance assessment of different absorber tube geometries for parabolic trough solar collector using nanofluid

Impact of corrugated duct and heat storage element on the performance of a low-cost solar air heater under forced air circulation: an experimental study

Experimental Investigation of Integrated Energy Storage on Thermal Performance Enhancement of Evacuated Glass-Thermal Absorber Tube Collector (EGATC) for Air Heating Application

Investigation of the enhancement of heat transfer in a flat plate solar collector with a corrugated tube under thermosiphon effect

Radially graded metal foams arrangement in heat storage device of photothermal utilization systems

Effect of channel depth ratio and absorber plate configuration on performance of a solar air heater

Enhancing performance in solar air channels: A numerical analysis of turbulent flow and heat transfer with novel shaped baffles