Abstract:To improve the thermal and combustion properties of nanothermites, a design theory of changing the state of matter and structural state of the reactants during reaction was proposed. The Al/MoO 3 /KClO 4 (Kp) nanothermite was prepared and the Al/MoO 3 nanothermite was used as a control. SEM and XRD were used to characterize the nanothermites; DSC was used to test thermal properties; and constant volume and open combustion tests were performed to examine their combustion performance. Phase and morphology characterization of the combustion products were performed to reveal the mechanism of the aluminothermic reaction. The results show that the Al/MoO 3 /Kp nanothermite exhibited excellent thermal properties, with a total heat release of 1976 J·g − 1 , increasing by approximately 33% of 1486 J·g − 1 of the Al/MoO 3 nanothermite, and activation energy of 269.66 kJ·mol − 1 , which demonstrated higher stability than the Al/MoO 3 nanothermite (205.64 kJ·mol − 1 ). During the combustion test, the peak pressure of the Al/MoO 3 /Kp nanothermite was 0.751 MPa, and the average pressure rise rate was 25.03 MPa·s − 1 , much higher than 0.188 MPa and 6.27 MPa·s − 1 of the Al/MoO 3 nanothermite. The combustion products of Al/MoO 3 nanothermite were Al 2 O 3 , MoO, and Mo, indicating insufficient combustion and incomplete reaction, whereas, the combustion products of Al/MoO 3 /Kp nanothermite were Al 2 O 3 , MoO, and KCl, indicating complete reaction. Their "coral-like" morphology was the effect of reactants solidifying after melting during the combustion process. The characterization of reactants and pressure test during combustion reveals the three stages of aluminothermic reaction in thermites. The excellent thermal and combustion performance of Al/MoO 3 /Kp nanothermite is attributed to the melt and decomposition of Kp into O 2 in the third stage. This study provides new ideas and guidance for the design of high-performance nanothermites.

Kinetic study and advanced decomposition models of superthermite-based nitrocellulose nanocomposite

Unraveling the Effect of MgAl/CuO Nanothermite on the Characteristics and Thermo-Catalytic Decomposition of Nanoenergetic Formulation Based on Nanostructured Nitrocellulose and Hydrazinium Nitro-Triazolone

Ti/CuO and Ti/CuO/Cellulose Nitrate Nanothermites: An Early Insight into Their Combustion Mechanism

Ti/CuO Nanothermite—Study of the Combustion Process

Reactive molecular dynamics simulation of thermal decomposition for nitromethane/nano-aluminum composites

Influence of a novel nano-thermite colloid based on CuO coated CNTs on the thermo-analytical characteristics of 1,3,5-trinitro-1,3,5-triazinane

Synergistic Catalytic Effect of Thermite Nanoparticles on HMX Thermal Decomposition

High speed 2-dimensional temperature measurements of nanothermite composites: Probing thermal vs. Gas generation effects

Experimental insight into interaction mechanism of 1H-Tetrazloe and nitrocellulose by kinetics methods and TG-DSC-FTIR analysis

Preparation and characterization of modified Al/Fe2O3 nano-thermite composite system

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition.

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition

Thermal safety characteristics of nanoscale nitrocellulose/stabilizer composite materials

Facile Formation of Nitrocellulose-Coated Al/Bi2O3 Nanothermites with Excellent Energy Output and Improved Electrostatic Discharge Safety

A strategic approach to thermal stability enhancement of nitrocellulose

Ab Initio Neural Network MD Simulation of Thermal Decomposition of a High Energy Material CL-20/TNT.

Reactive molecular dynamics simulation of thermal decomposition for nano-AlH3/TNT and nano-AlH3/CL-20 composites

Changes in the state of matter of KCIO4 to improve thermal and combustion properties of Al/MoO3 nanothermite

Combustion behaviour and reaction kinetics of GO/Al/oxidizing salts ternary nanothermites

Study on combustion characteristics and pyrotechnic cutting effects of bimetal thermite Ni/Al/Fe2O3 system

Ammonium Perchlorate As an Effective Additive for Enhancing the Combustion and Propulsion Performance of Al/CuO Nanothermites