Abstract:Developing novel materials is crucial to overcoming the performance degradation of lithium-ion batteries (LIBs) for low-temperature applications. In this work, we demonstrate a novel copper zinc tin sulfide (Cu2ZnSnS4, CZTS) thin film with nanowalls structure as the anode material in thin-film LIBs for low-temperature applications. The quaternary CZTS synthesized by a simple hydrothermal method shows a higher reversible capacity of 475 mAh g–1 after 200 cycles at −10 °C with the EC/DEC/DMC-based electrolyte in comparison with the graphite electrode (110 mAh g–1 after 100 cycles at −10 °C). The effects of temperature and electrolyte systems including EC/DEC- and EC/DEC/DMC-based electrolytes on the cycling performance are studied. The faster Li-ion transport in the electrolyte–electrode interface of the CZTS anode material is obtained in the EC/DEC/DMC-based electrolyte at −10 °C. In addition, the depth-profiling XPS results of the CZTS anode reveal that a solid electrolyte interphase (SEI) layer with less carbon content is formed in the EC/DEC/DMC-based electrolyte likely associated with the interfacial stability at low temperature. The enhanced cycling performance of CZTS could be attributed to its improved interfacial stability and Li+ diffusion, along with the formation of an interconnected active material architecture at low temperature.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c01341?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01341</a>.Cyclic voltammetry of CZTS with different electrolyte solvents (Figure S1), sulfur K-edge X-ray absorption spectra of CZTS (Figure S2), galvanostatic charge/discharge profile with different electrolyte solvents (Figure S3), charge–discharge profile of MCMB with different electrolytes (Figure S4), ex-situ XRD and Raman analysis of CZTS after 50 cycles at different temperatures and electrolytes (Figure S5), pseudocapacitive contribution in the CV curve obtained with EC/DEC-based electrolyte (Figure S6); O 1s, F 1s, and Li 1s spectra of the CZTS anodes after 50 discharge–charge cycles (Figure S7–S9), discharge capacities of Li-ion batteries at low temperatures (Table S1), and EIS analysis of CZTS (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c01341/suppl_file/sc1c01341_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Li-storage of Li2ZnTi3O8@C-N anodes with high-performance in a wide temperature range

In situ self-assembly assisted synthesis of N-doped mesoporous hierarchical carbon aerogels-wrapped Li2ZnTi3O8 composite for high-rate lithium ion batteries

Enhancing the lithium-ion storage capability of Cu2ZnSnS4 anodes via a nitrogen-doped conductive support

Porous TiNb2O7@N-C As Anode Materials for Lithium-Ion Batteries with Ultrahigh-Rate Performance

Conductivity Optimization Via Intertwined CNTs Between TiNb2O7@C Microspheres for a Superior Performance Li-ion Battery Anode.

Facile synthesis of n-doped carbon coated lithium zinc titanate particles towards enhanced performance in lithium-ion battery applications

High performance Li2ZnTi3O8 coated with N-doped carbon as an anode material for lithium-ion batteries

Facile Synthesis Of Zno Nanoparticles On Nitrogen-Doped Carbon Nanotubes As High-Performance Anode Material For Lithium-Ion Batteries

Copper Zinc Tin Sulfide Anode Materials for Lithium-Ion Batteries at Low Temperature

Controllable Synthesis of CNT@ZnO Composites with Enhanced Electrochemical Properties for Lithium-Ion Battery

Pseudocapacitive Li+ Intercalation in Zno/Zno@C Composites Enables High-Rate Lithium-Ion Storage and Stable Cyclability

Enhancing Ultrafast Lithium Ion Storage of Li4Ti5O12 by Tailored TiC/C Core/Shell Skeleton Plus Nitrogen Doping

Fabrication of Dual-Modified Carbon Network Enabling Improved Electronic and Ionic Conductivities for Fast and Durable Li2TiSiO5 Anodes

ZnOHF/N-doped carbon hybrids as a novel anode material for enhanced lithium storage

Nanostructured LiTi2(PO4)3 Anode with Superior Lithium and Sodium Storage Capability Aqueous Electrolytes

Ultrasmall ZnO nanocrystals confined in honeycombed N‐doped carbon for high performance and stable lithium/sodium ion batteries

Rational design of 3D N-doped carbon nanosheet framework encapsulated ultrafine ZnO nanocrystals as superior performance anode materials in lithium ion batteries

Superior Rate Performance of Li 4 Ti 5 O 12 /tio 2 /c/cnts Composites Via Microemulsion-Assisted Method As Anodes for Lithium Ion Battery

A novel composite of SnO nanoparticles and SiO2@N-doped carbon nanofibers with durable lifespan for diffusion-controlled lithium storage

High Performance Li 2 ZnTi 3 O 8 @C Anode Material Fabricated by a Facile Method Without an Additional Carbon Source

Ultrathin Porous Hexagonal Zn3V3O8/ZnO@N-C Nanoplates Synthesized via a Temperature-Controlled Phase Separation Method as High-Performance Anode Material for Lithium-Ion Batteries