Abstract:Improving the integrity of precast concrete (PC) frame structures using dry connections is essential for enhancing their robustness against progressive collapse. Therefore, three PC beam–column assemblies using different dry connections specially designed to ensure the connectivity were experimentally examined under progressive collapse scenarios. And a seven-point loading tree device was adopted to simulate the uniformly distributed loading conditions in practical engineering. The connection details were classified as follows: normal top-and-seat angle connection in TSA, strengthened top-and-seat angle connection in STSA, and strengthened top-and-seat angle with high ductility longitudinal reinforcements in the plastic regions in DSTSA. Under small deformations, STSA had the highest first peak load attributable to its strengthened joint connection. TSA obtained a lower load than that of STSA because of the low joint connection stiffness. Meanwhile, DSTSA achieved the lowest load among the three specimens because the smoother surface of the high-ductility reinforcements (compared with that of normal ones) weakened its bond to the concrete. However, under large deformations, the high ductility of the reinforcements ensured the specimen integrity; consequently, the largest final load was achieved in DSTSA. On the contrary, the high joint stiffness and normal reinforcements in STSA hindered the beam end rotation, and the steel angle failed early in TSA. As a result, the two connections failed to ensure the specimen integrity. To further shed light on the resistance mechanisms of beam–column assemblies under the uniformly distributed loading condition, an iteration-based model was developed to calculate the first peak load under the beam and compressive arch actions. The maximum prediction error achieved was 12%. Based on the model, the load contribution from the friction effect of the loading device was identified as 27%. And it was found that during the collapse, increasing reinforcement deformation region that might be induced by slippage between the concrete and reinforcements could lead to a continuous increase in the horizontal reaction force after the specimen reaching the first peak load.

Anti-Progressive Collapse Performance of Fully Bolted Steel Frame Structure Connections Based on Performance Improvement

Experimental Study on Progressive Collapse-Resistant Behavior of Reinforced Concrete Frame Structures

Experimental Study On Seismic Behavior Of Innovative Multi-Cellular Cft-Walls With Tie-Bolts

Research on the resistance of modified bolted connection under progressive collapse scenario

Experimental and numerical investigation on the anti-progressive collapse performance of fabricated connection with CFST column and composite beam

Progressive collapse analysis of precast reinforced concrete beam-column assemblies with different dry connections

Progressive collapse behaviour of composite substructure with large rectangular beam-web openings

Anti-collapse performance of steel frames with RWS connections under a column removal scenario

Experimental study of steel beam-column joints with novel slot-bolted connections under a central-column-removal scenario

Performance analysis of steel frame joints reinforced against progressive collapse by partially-penetrated butt-welded corrugated steel plates

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Failure mechanism of steel frames with angle steel-bolted connections exposed to fire under progressive collapse condition

Anti-collapse performance of concrete-filled steel tubular composite frame with assembled tensile steel brace under middle column removal

Analysis of Progressive Collapse Resistance in Precast Concrete Frame with a Novel Connection Method

Anti-progressive collapse performance analysis of different configurations ring plate connection between concrete-filled steel tubular column and H-steel beam

Progressive Collapse Mechanism Analysis of Concrete-Filled Square Steel Tubular Column to Steel Beam Joint with Bolted–Welded Hybrid Connection

Progressive collapse performance analysis of concrete-filled square steel tubular column to composite beam with outer ring plate connection

Progressive collapse resistance of precast concrete beam–column assemblies using dry connections under uniformly distributed loading condition

Structural performance of composite connections with a uniaxial symmetric steel-beam section

Effects of Steel Braces on Robustness of Steel Frames against Progressive Collapse

Progressive Collapse Analysis of Concrete-filled Steel Tubular Column to Steel Beam Connections Using Multi-scale Model